where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1196 views
Technical Discussions
prasetya
NDT Inspector,
Kwalita Inspectindo Dinamika, PT, Indonesia, Joined May 2009, 11

prasetya

NDT Inspector,
Kwalita Inspectindo Dinamika, PT,
Indonesia,
Joined May 2009
11
07:32 Mar-22-2010
film interpretation of weld defect

Hello frends..

I need film interpretation of weld defect, can you help me...

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
12:45 Mar-22-2010
Re: film interpretation of weld defect
In Reply to prasetya at 07:32 Mar-22-2010 (Opening).

There are good materials that explain how to interpret welds from the radiographic films. Then there are standard films that are produced by the various standard bodies and IIW. A good level II or Level III should be able to help you, if you are new to the field. I would have gladly helped you if I were near you physically, since I was involved quite deeply in development, production and in-service inspection of TIG welds in austenitic stainless steels and zirconium alloys.

Regards

Swamy

 
 Reply 
 
ossama Nakhla
ossama Nakhla
07:15 Oct-17-2013
Re: film interpretation of weld defect
In Reply to prasetya at 07:32 Mar-22-2010 (Opening).

Hi
Please check
http://www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/TechCalibrations/RadiographInterp.htm


Thanks
Ossama Nakhla
API510, API653 and API570
CSWIP II welding.
Mech. Eng. (BSC. Mech Engr.).
osshabib@yahoo.com

 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window