where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

976 views
Technical Discussions
AxlZ AekZ
AxlZ AekZ
06:49 Aug-20-2001
Can I use coil sensor in DC system?

Can I use coil sensor in DC system for detecting LMA or LF of wire rope?


 
 Reply 
 
Patrick
Patrick
04:13 Aug-20-2001
Re: Can I use coil sensor in DC system?
: Can I use coil sensor in DC system for detecting LMA or LF of wire rope?
.
We know how to test wire rope with eddy current method but what is LMA and LF ?



 
 Reply 
 
Tadeusz Stepinski
R & D
Uppsala University, Sweden, Joined Nov 1998, 14

Tadeusz Stepinski

R & D
Uppsala University,
Sweden,
Joined Nov 1998
14
09:50 Aug-21-2001
Re: Can I use coil sensor in DC system?
: Can I use coil sensor in DC system for detecting LMA or LF of wire rope?
.
You have to give some more details if you want to get some help.


 
 Reply 
 
Alexander Mironenko
Sales,
INTRON PLUS Ltd., Russia, Joined Sep 2001, 17

Alexander Mironenko

Sales,
INTRON PLUS Ltd.,
Russia,
Joined Sep 2001
17
01:52 Sep-10-2001
Re: Can I use coil sensor in DC system?
: : Can I use coil sensor in DC system for detecting LMA or LF of wire rope?
: .
: We know how to test wire rope with eddy current method but what is LMA and LF ?
.
In general you may use coil sensor. LMA - Loss of Metallic cross-sectional Area, LF - Local Flaws (see ASTM 1571-94).



 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window