where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
787 views
Technical Discussions
ismail sarpun
ismail sarpun
00:48 Sep-11-2001
Rayleigh waves

I want to establish a system that can measure grain size by rayleigh waves.
Is there anybody that help me, how can I measure grain size by this way and
how can establish that experiment setup.
thanks for your helps.


    
 
 Reply 
 
Ernst Niederleithinger
R & D, -
BAM (Fed. inst. for material research and testing, Germany, Joined Jun 2001, 7

Ernst Niederleithinger

R & D, -
BAM (Fed. inst. for material research and testing,
Germany,
Joined Jun 2001
7
01:00 Sep-11-2001
Re: Rayleigh waves
: I want to establish a system that can measure grain size by rayleigh waves.
: Is there anybody that help me, how can I measure grain size by this way and
: how can establish that experiment setup.
: thanks for your helps.

Very interesting. Rayleigh waves are very popular in geophysical/geotechnical testing
(SASW method).
Grain size: R. Chammas (of French streets and bridges authority)
has done FE modelling on the influence of inclusions
on surface waves (rabih.chammas@lcps.fr).
Please keep me informed!





    
 
 Reply 
 
Bruce Maxfield
Engineering, electronics and instrumentation
Analogic Engineering, Inc., USA, Joined Jan 2000, 10

Bruce Maxfield

Engineering, electronics and instrumentation
Analogic Engineering, Inc.,
USA,
Joined Jan 2000
10
01:24 Sep-12-2001
Re: Rayleigh waves
: I want to establish a system that can measure grain size by rayleigh waves.
: Is there anybody that help me, how can I measure grain size by this way and
: how can establish that experiment setup.
: thanks for your helps.
.

I have been working with Fallon Ultrasonics, Inc. on methods to deduce residual stresses from elastic wave velocity measurements. As part of this work, I have used Rayleigh wave ( relatively insensitive to stress) and critically refracted longitudinal wave (much more sensitive to stress) velocities (actually, travel times). These waves have been generated using focused ultrasonic beams like those generated by spherically and cylindrically focused ultrasonic transducers, by plastic wedges of an appropriate angle and by plane waves at an angle to the specimen surface in a water bath. Each of these methods has one or more advantages over the others. In all cases of practical alloys that we have studied, grain scattering is the material parameter that limits the highest frequency that can be used. We have not yet done much quantitative work with respect to determining grain size but it is very clear that the attenuation of these waves is strongly influenced by grain scattering at higher frequencies (as expected) and that this attenuation can be measured with relative ease. There are several corrections that must be made to the measured attenuation in order to obtain the grain scattering term which can be used to deduce the "mean" grain diameter in the region of material being sampled by the elastic wave. If you care to let me know the material and grain size range that is of interest to you, I can give you some general idea of the magnitude of effort that will be required.


    
 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window