where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

900 views
Career Discussions
junho
NDT Inspector,
KOREA Material INSPECTION, South Korea, Joined Oct 2009, 21

junho

NDT Inspector,
KOREA Material INSPECTION,
South Korea,
Joined Oct 2009
21
13:55 Oct-12-2009
I want TOFD training data

HI

I'm KOREA university student

Currently alone it stands it study

But it is very difficult.

To Korea plentifully there is not a data to about TOFD

So I want TOFD data. To send data with the mail or web site link

English is sorry clumsy


Thank you

 
 Reply 
 
vijayaraghavan
Consultant,
Freelance consultant, India, Joined Dec 2009, 12

vijayaraghavan

Consultant,
Freelance consultant,
India,
Joined Dec 2009
12
10:18 Jun-05-2010
Re: I want TOFD training data
In Reply to junho at 13:55 Oct-12-2009 (Opening).

contact M/S Bluestar Chennai for further details

 
 Reply 
 
Vignesh
NDT Inspector, Blue Star Limited
IE , India, Joined May 2009, 29

Vignesh

NDT Inspector, Blue Star Limited
IE ,
India,
Joined May 2009
29
07:11 Jun-06-2010
Re: I want TOFD training data
In Reply to junho at 13:55 Oct-12-2009 (Opening).

Hi Junho,
You can rather also contact Olympus NDT as they would be in a position to get you the data in the language you need. you can even find contact details near to you from www.olympusndt.com

regards

 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window