where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
753 views
Technical Discussions
Mike
Mike
01:22 Sep-21-2001
V.I.P. Inspection Port System

Back in 1991 - 1992 I purchased a system for installing inspection ports in insulation on aboverground storage tanks. The system uses a Greenlee hydraluic press to expand a metal grommet in the insulation and then a removable plug is inserted into the ring creating a permanent inspection port. When I bought the system the company I was working for at the time purchased several thousand metal grommets and plugs which have lasted me until today. Now I have no idea where to go to purchase more of these components or if the system is still available. Does anyone know anything about VIP?? I did some web searches and came up empty.


 
 Reply 
 
Gary
NDT Inspector, special inspector
Testing Engineers Inc., USA, Joined Nov 1998, 1

Gary

NDT Inspector, special inspector
Testing Engineers Inc.,
USA,
Joined Nov 1998
1
05:33 Sep-22-2001
Re: V.I.P. Inspection Port System
: Back in 1991 - 1992 I purchased a system for installing inspection ports in insulation on aboverground storage tanks. The system uses a Greenlee hydraluic press to expand a metal grommet in the insulation and then a removable plug is inserted into the ring creating a permanent inspection port. When I bought the system the company I was working for at the time purchased several thousand metal grommets and plugs which have lasted me until today. Now I have no idea where to go to purchase more of these components or if the system is still available. Does anyone know anything about VIP?? I did some web searches and came up empty.
.
May not be what you,re looking for but is another option.
http://www.inspectionplug.com/


 
 Reply 
 
Warren Singer
Warren Singer
02:12 Jan-07-2002
Re: V.I.P. Inspection Port System
Mike, check out this site. The system is much better, less expensive, and faster to install. I haven't seen any of those grommets in a long time. : Back in 1991 - 1992 I purchased a system for installing inspection ports in insulation on aboverground storage tanks. The system uses a Greenlee hydraluic press to expand a metal grommet in the insulation and then a removable plug is inserted into the ring creating a permanent inspection port. When I bought the system the company I was working for at the time purchased several thousand metal grommets and plugs which have lasted me until today. Now I have no idea where to go to purchase more of these components or if the system is still available. Does anyone know anything about VIP?? I did some web searches and came up empty.
.



 
 Reply 
 
Warren Singer
Warren Singer
02:16 Jan-07-2002
Re: V.I.P. Inspection Port System
: : Back in 1991 - 1992 I purchased a system for installing inspection ports in insulation on aboverground storage tanks. The system uses a Greenlee hydraluic press to expand a metal grommet in the insulation and then a removable plug is inserted into the ring creating a permanent inspection port. When I bought the system the company I was working for at the time purchased several thousand metal grommets and plugs which have lasted me until today. Now I have no idea where to go to purchase more of these components or if the system is still available. Does anyone know anything about VIP?? I did some web searches and came up empty.
: .
: May not be what you,re looking for but is another option.
: http://www.inspectionplug.com/
.
Mike, check out www.inspectionportsystems.com for Inspection Port Systems. This is the best port we've ever seen. Easy and fast to install. Waterproof. Reliable. Accepted almost everywhere.


 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window