where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.
208 views
Technical Discussions
Omid Ghorbanian
Omid Ghorbanian
05:07 Sep-26-2001
Control of welding parameters with eddy current


: Dear colleagues,

We have a welder(MIG/MAG/TIG) robot(in Amirkabir university of thechnology-IRAN-TEHRAN) and we would like to control it with eddy current response.
Therfore we would like to make an overview of manner "automatic welding with on-line inspection
of eddy current" so that The operating welding variables affect the working of the process,
and can be adjusted during the welding operation i.e.: intensity I, voltage U, welding speed V
,distance between electrode and workpice etc. etc. are adjasted automaticaly (as for the
eddy current response)for production weld with the best quality. (welding parameters are chosen
to match the strength and toughness mechanical properties)

What are the main factors involved and roughly how much variations can these factors
be expected to cause?

: : what is the influence of welding parameters (such as intensity I, voltage U,
welding speed V,distance between electrode and workpice etc. etc.) with eddy current signal?

: : what is the influence of weld quality (shch as toughness and strength etc.) with
eddy current signal?

: : Does you have experience with such factors?

: : Does you know existing literature or website with a proper covering of this subject?

: : We are especially looking forward to replies relevant to control of automatic welding parameters with eddy current in ferromagnetic steel type.


: :Omid Ghorbanian


    
 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window