where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
2087 views
Technical Discussions
V K Dilip
Consultant
Industrial Support Services, Saudi Arabia, Joined Jan 2001, 8

V K Dilip

Consultant
Industrial Support Services,
Saudi Arabia,
Joined Jan 2001
8
01:25 Jul-24-2001
Robotic Tank Floor Scanning

Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?





 
 Reply 
 
Richard Kazares
Richard Kazares
06:17 Jul-24-2001
Re: Robotic Tank Floor Scanning
: Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
.
.NDT Automation's Large Structure Inspection (LSI) system can provide 100% UT coverage of tank floors on a fully automated basis. The system is not designed to be used while the tank is full, however - but it does minimize the total time needed to perform a 100% UT tank floor corrosion survey - quantitatively (NOT qualitatively like some other technologies). The LSI system produces real numbers in a highly usable spreadsheet format.

Hope this is of help to you.

If you wish - you can follow the URL link shown with this reply to www.ndtautomation.com and click on the LSI system.



 
 Reply 
 
Matt Clark
Matt Clark
08:27 Jul-24-2001
Re: Robotic Tank Floor Scanning
: Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
. You can evaluate the tank floor condition by using acoustic emission.This can be operated whilst the tank is in service. Their are a few conditions:
1. The content of the tank must not have changed within the last 6-12months.
2. The tank should not have been cleaned in the last 12 months
3. The 'flow' in and from the tank must be shut down at least 24 hours prior to the test.
4. There are some enviromental limits also i.e heavy rain or elevated temperatures can hinder the results.
5. Access around the full perimiter of the tank must be available and local areas of insulation need to be removed to access probe points.
.Note the survey will confirm thickness but has and does confirm condition and proffesional evaluation can determine if a follow up intrusive survey is required.



 
 Reply 
 
Matt Clark
Matt Clark
08:29 Jul-24-2001
Re: Robotic Tank Floor Scanning
: : Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
: . You can evaluate the tank floor condition by using acoustic emission.This can be operated whilst the tank is in service. Their are a few conditions:
: 1. The content of the tank must not have changed within the last 6-12months.
: 2. The tank should not have been cleaned in the last 12 months
: 3. The 'flow' in and from the tank must be shut down at least 24 hours prior to the test.
: 4. There are some enviromental limits also i.e heavy rain or elevated temperatures can hinder the results.
: 5. Access around the full perimiter of the tank must be available and local areas of insulation need to be removed to access probe points.
: .Note the survey will not confirm thickness but has and does confirm condition and proffesional evaluation can determine if a follow up intrusive survey is required.
.PLEASE NOTE CHANGE - '****NOT CONFIRM THICKNESS****



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
01:52 Jul-24-2001
Re: Robotic Tank Floor Scanning
There are three established robots
InTank USA
SOLEX Robotics USA
Raytheon Engineers USA

Additionally there is a Franco/German project with little reported track record and a new European Funded Development Project with South Bank University UK.
The first three have practical experience. Be aware that the robots have limitations on types of product, tank cleanliness etc. and are not generally aimed at heavy crude oil tanks.
The tools are also very expensive and as such a statistical sampling approach is used. You should study litreature as to the pros and cons of statistical sampling of tank floors. Whilst some operators favour this approach there are a number of reported tank failures subsequent to statistical sampled floor inspection.

Other operators are using the approach of ranking tank floor condition with Acoustic Emission and then sending the robot to the areas of damage identified by the AE. This package inspection removes the concern with statistical sampling.


 
 Reply 
 
Rob Salvatore
Rob Salvatore
03:04 Aug-28-2001
Resources in Oz? Re: Robotic Tank Floor Scanning
: There are three established robots
: InTank USA
: SOLEX Robotics USA
: Raytheon Engineers USA
.

Just curious whether anyone knows whether there are any of these robotic tank floor scanners in Australia, or easy access to Australia?

Thanks.
Rob Salvatore
robDOTsalvatoreHAT[remove"h"]qenosDOTTY[remove "ty"]com


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
608
08:20 Aug-30-2001
Re: Resources in Oz? Re: Robotic Tank Floor Scanning
Rob,

During our work on the CD-ROM of the 10th Asia Pacific Conf. on NDT
I noticed a paper which may help you.

"Life Management Of Above Ground Atmospheric Storage Tanks"
C.J. Moss, RR Griffiths, A Bishop, M Dinon
Contact: harry.moss@santos.com.au"

The complete CD-ROM will be published in our October issue.

Best regards,
Rolf Diederichs

-------
: : There are three established robots
: : InTank USA
: : SOLEX Robotics USA
: : Raytheon Engineers USA
: .
.
: Just curious whether anyone knows whether there are any of these robotic tank floor scanners in Australia, or easy access to Australia?
.
: Thanks.
: Rob Salvatore
: robDOTsalvatoreHAT[remove"h"]qenosDOTTY[remove "ty"]com





 
 Reply 
 
alborz
alborz
02:48 Sep-27-2001
Re: Robotic Tank Floor Scanning
i have a project about deminer robot


 
 Reply 
 
van Cuyck / a2ms
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

van Cuyck / a2ms

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
04:25 Sep-27-2001
Re: Robotic Tank Floor Scanning
: i have a project about deminer robot
.

And what else?


 
 Reply 
 
ali
ali
03:03 Nov-21-2001
Re: Robotic Tank Floor Scanning
: i have a project about deminer robot
.
if u can help me,send me a mail


 
 Reply 
 
Majid
Majid
08:38 Feb-24-2002
Re: Robotic Tank Floor Scanning
Hi.
i have a project about deminer robot
and i want to khnow that can you help me.
tanks



 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window