where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.
760 views
Technical Discussions
Farshad Mobasher-Fard
Engineering
Nikan Machine, Iran, Joined Sep 2001, 3

Farshad Mobasher-Fard

Engineering
Nikan Machine,
Iran,
Joined Sep 2001
3
05:25 Oct-09-2001
NDT history in Iran?

Dear friends,
I am a mechanical Engineering student. I am researching
about the " History of NDT in Iran ". Considering that
before revolution in Iran - 1979 - just foreign companies
had been involved in this field and actually they have left
Iran after revolution. Therefore NDT History is just traceable
from 1980 in Iran.
I really appreciate if any Co. or Inspector can help me
through any information that they have from the years before
1979.
With regards,Farshad Mobasher-Fard



    
 
 Reply 
 
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 89

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
89
05:33 Oct-09-2001
Re: NDT history in Iran?
Farshad,

This may not help you much but I can tell you that in 1979 I was an NDT instructor for the USAF at Chanute AFB in Illinois and we had a number of students from Iran. Perhaps, you can somehow find one of them. Perhaps many of the native NDT technicians got their training through the military.

Good Luck.

Bill Blum

: Dear friends,
: I am a mechanical Engineering student. I am researching
: about the " History of NDT in Iran ". Considering that
: before revolution in Iran - 1979 - just foreign companies
: had been involved in this field and actually they have left
: Iran after revolution. Therefore NDT History is just traceable
: from 1980 in Iran.
: I really appreciate if any Co. or Inspector can help me
: through any information that they have from the years before
: 1979.
: With regards,Farshad Mobasher-Fard
:
.



    
 
 Reply 
 
Dave Ronson
Dave Ronson
05:08 Oct-15-2001
Re: NDT history in Iran?
: Dear friends,
: I am a mechanical Engineering student. I am researching
: about the " History of NDT in Iran ". Considering that
: before revolution in Iran - 1979 - just foreign companies
: had been involved in this field and actually they have left
: Iran after revolution. Therefore NDT History is just traceable
: from 1980 in Iran.
: I really appreciate if any Co. or Inspector can help me
: through any information that they have from the years before
: 1979.
: With regards,Farshad Mobasher-Fard
:
.
I worked in Iran as a Welding Inspector in 1976-1977, for a company called Taqcco. They were an Iranian consulting company operating out of Terhan and I believe they had their own NDT personnel.
The job I was on was building Desalting plants in Ahwaz, it was a joint venture with Foster Wheeler.
The majority of NDT performed was Radiography using an Isotope as the radiation source. I do remember the equipment was quite primative and had the potential to give the operator large doses of radiation.


    
 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window