where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.
802 views
Technical Discussions
Farshad Mobasher-Fard
Engineering
Nikan Machine, Iran, Joined Sep 2001, 3

Farshad Mobasher-Fard

Engineering
Nikan Machine,
Iran,
Joined Sep 2001
3
05:25 Oct-09-2001
NDT history in Iran?

Dear friends,
I am a mechanical Engineering student. I am researching
about the " History of NDT in Iran ". Considering that
before revolution in Iran - 1979 - just foreign companies
had been involved in this field and actually they have left
Iran after revolution. Therefore NDT History is just traceable
from 1980 in Iran.
I really appreciate if any Co. or Inspector can help me
through any information that they have from the years before
1979.
With regards,Farshad Mobasher-Fard



 
 Reply 
 
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 89

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
89
05:33 Oct-09-2001
Re: NDT history in Iran?
Farshad,

This may not help you much but I can tell you that in 1979 I was an NDT instructor for the USAF at Chanute AFB in Illinois and we had a number of students from Iran. Perhaps, you can somehow find one of them. Perhaps many of the native NDT technicians got their training through the military.

Good Luck.

Bill Blum

: Dear friends,
: I am a mechanical Engineering student. I am researching
: about the " History of NDT in Iran ". Considering that
: before revolution in Iran - 1979 - just foreign companies
: had been involved in this field and actually they have left
: Iran after revolution. Therefore NDT History is just traceable
: from 1980 in Iran.
: I really appreciate if any Co. or Inspector can help me
: through any information that they have from the years before
: 1979.
: With regards,Farshad Mobasher-Fard
:
.



 
 Reply 
 
Dave Ronson
Dave Ronson
05:08 Oct-15-2001
Re: NDT history in Iran?
: Dear friends,
: I am a mechanical Engineering student. I am researching
: about the " History of NDT in Iran ". Considering that
: before revolution in Iran - 1979 - just foreign companies
: had been involved in this field and actually they have left
: Iran after revolution. Therefore NDT History is just traceable
: from 1980 in Iran.
: I really appreciate if any Co. or Inspector can help me
: through any information that they have from the years before
: 1979.
: With regards,Farshad Mobasher-Fard
:
.
I worked in Iran as a Welding Inspector in 1976-1977, for a company called Taqcco. They were an Iranian consulting company operating out of Terhan and I believe they had their own NDT personnel.
The job I was on was building Desalting plants in Ahwaz, it was a joint venture with Foster Wheeler.
The majority of NDT performed was Radiography using an Isotope as the radiation source. I do remember the equipment was quite primative and had the potential to give the operator large doses of radiation.


 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window