where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
494 views
Technical Discussions
Manuel Rodriguez
Teacher
Central University of Las Villas, Cuba, Joined Jul 2001, 3

Manuel Rodriguez

Teacher
Central University of Las Villas,
Cuba,
Joined Jul 2001
3
05:08 Oct-16-2001
Signal processing

I'm looking for information on digital signal processing of ultrasound signal for detection on cracks and defects in concrete applying the emision-reception methods.

I'm research in Central University of Las Villas(Cuba). My job is study of physico- mechanical properties of concrete applying ultrasonic techeniques.

Thanking you in anticipation

Manuel


 
 Reply 
 
Martin Schickert
R & D,
Institute for Materials Research and Testing, Germany, Joined Jan 2000, 18

Martin Schickert

R & D,
Institute for Materials Research and Testing,
Germany,
Joined Jan 2000
18
05:24 Oct-16-2001
Re: Signal processing
: I'm looking for information on digital signal processing of ultrasound signal for detection on cracks and defects in concrete applying the emision-reception methods.
.
: I'm research in Central University of Las Villas(Cuba). My job is study of physico- mechanical properties of concrete applying ultrasonic techeniques.
.
: Thanking you in anticipation
.
: Manuel
.

If SAFT-imaging as reported in http://www.ndt.net/article/civil497/mschic/mschic.htm comes close to
what you are looking for you may contact me for further information.

Martin Schickert
MFPA Weimar
(Materials Research and Testing Institute at Bauhaus-University Weimar, Germany)



 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window