where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

525 views
Technical Discussions
Christoph Schnitger
Christoph Schnitger
01:28 Oct-23-2001
Spott Video Inspection ( called SVI )

Dear Members of the NDT Community...

i am looking for a system called Spott - Video - Inspection
which is really new on the german NDT Market.

This system is probably more useful to test and detect faults
in Glas fibre reinforced plastic (GFK)
Carbon fibre reinforced plastic (CFK)
Composite materials
Sandwich and honeycomb constructions
Titanium and aluminium coatings


The really short description about the technigue :

Active test method
Exposure of the parts (hull) with certain wave lengths (light)
Registration of all relevant datas
Software processing these datas into image files

Every Information about this NDT Method will be helpful.
Many Thanks in advance !

C.Schnitger ( schnitger@eure.de )





 
 Reply 
 
Michel Honlet
Michel Honlet
02:48 Apr-25-2002
Re: Spott Video Inspection ( called SVI )
Dear Mr Schnitger,

we are consultants for the industry regarding NDT exclusively with optical techniques (see www.honlet.com ; page still in a build-up process...)

My question to you:
Have you progressed in getting more information about SVI and what level of information or experience have you now? What did tell you (except the manufacturer, of course) this is a really new technique?
From what I have seen up to now I am not yet convinced that it is really new. Despite being an optimistic and positive person in this case I still feel an attempt to "sell" something existing as something "new", based on such experience in the past regarding optical methods. But I am ready to learn more and to join your opinion if that is still valid. Ultimately, the industrie finds out sooner or later what is going on but appreciates independent support in the selection process in order to avoid waste of time. So do we.

Many thanks in advance for your reply!

Michel Honlet - Managing Director


: Dear Members of the NDT Community...
.
: i am looking for a system called Spott - Video - Inspection
: which is really new on the german NDT Market.
.
: This system is probably more useful to test and detect faults
: in Glas fibre reinforced plastic (GFK)
: Carbon fibre reinforced plastic (CFK)
: Composite materials
: Sandwich and honeycomb constructions
: Titanium and aluminium coatings
.
:
: The really short description about the technigue :
.
: Active test method
: Exposure of the parts (hull) with certain wave lengths (light)
: Registration of all relevant datas
: Software processing these datas into image files
.
: Every Information about this NDT Method will be helpful.
: Many Thanks in advance !
.
: C.Schnitger ( schnitger@eure.de )
.
.



 
 Reply 
 

Product Spotlight

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window