01:28 Oct-23-2001 Spott Video Inspection ( called SVI )
Dear Members of the NDT Community...
i am looking for a system called Spott - Video - Inspection which is really new on the german NDT Market.
This system is probably more useful to test and detect faults in Glas fibre reinforced plastic (GFK) Carbon fibre reinforced plastic (CFK) Composite materials Sandwich and honeycomb constructions Titanium and aluminium coatings
The really short description about the technigue :
Active test method Exposure of the parts (hull) with certain wave lengths (light) Registration of all relevant datas Software processing these datas into image files
Every Information about this NDT Method will be helpful. Many Thanks in advance !
02:48 Apr-25-2002 Re: Spott Video Inspection ( called SVI ) Dear Mr Schnitger,
we are consultants for the industry regarding NDT exclusively with optical techniques (see www.honlet.com ; page still in a build-up process...)
My question to you: Have you progressed in getting more information about SVI and what level of information or experience have you now? What did tell you (except the manufacturer, of course) this is a really new technique? From what I have seen up to now I am not yet convinced that it is really new. Despite being an optimistic and positive person in this case I still feel an attempt to "sell" something existing as something "new", based on such experience in the past regarding optical methods. But I am ready to learn more and to join your opinion if that is still valid. Ultimately, the industrie finds out sooner or later what is going on but appreciates independent support in the selection process in order to avoid waste of time. So do we.
Many thanks in advance for your reply!
Michel Honlet - Managing Director
: Dear Members of the NDT Community... . : i am looking for a system called Spott - Video - Inspection : which is really new on the german NDT Market. . : This system is probably more useful to test and detect faults : in Glas fibre reinforced plastic (GFK) : Carbon fibre reinforced plastic (CFK) : Composite materials : Sandwich and honeycomb constructions : Titanium and aluminium coatings . : : The really short description about the technigue : . : Active test method : Exposure of the parts (hull) with certain wave lengths (light) : Registration of all relevant datas : Software processing these datas into image files . : Every Information about this NDT Method will be helpful. : Many Thanks in advance ! . : C.Schnitger ( email@example.com ) . .
Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB
ed Array iProbe and inspection software package. Perform affordable weld
inspection and corrosion mapping inspections with this powerful but small system. The probe
has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
UCI hardness tester NOVOTEST T-U2 is is used for non-destructive
hardness testing of:
alloys by scales of hardness: Rockwell (HRC), Brinell
(HB), Vickers (HV);
non-ferrous metals, alloys of iron etc., and using five additional
scales for calibration;
with tensile strength (Rm) scale determines the tensile strength
of carbon steel pearlitic products by automatic recalculation from
Brinell (HB) hardness scale.