where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

4203 views
Technical Discussions
David Bunch
David Bunch
13:15 Sep-03-2010
Shot time calculator for Graphing Calculators

A coworker of mine told me of a radiography shot time program than can be used on graphing calculators (such as the Texas Instruments TI-83). You punch in the source to film distance, the curies you are using, etc, and it will calculate the shot time.

Does anyone know where I can find this program?

 
 Reply 
 
LK
NDT Inspector,
Norway, Joined May 2008, 104

LK

NDT Inspector,
Norway,
Joined May 2008
104
14:57 Sep-03-2010
Re: Shot time calculator for Graphing Calculators
In Reply to David Bunch at 13:15 Sep-03-2010 (Opening).

I have one program, works for both X and gamma, with refrences to EN1435 (eg minimal SFD required, film class to be used etc) but ... it's in german. Let me know if interested.

 
 Reply 
 
David Bunch
David Bunch
20:43 Sep-05-2010
Re: Shot time calculator for Graphing Calculators
In Reply to LK at 14:57 Sep-03-2010 .

Thanks for the offer. But unfortunately I don't know German.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 894

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
894
14:53 Sep-06-2010
Re: Shot time calculator for Graphing Calculators
In Reply to David Bunch at 20:43 Sep-05-2010 .

David,

I don't know about a calculator or computer software, but there is a slide ruler (those things we used before calcualtor LOL) for that purpose. It will calculate exposure for Ir192 and Co60. It should be available from your supplier.

 
 Reply 
 
David Bunch
David Bunch
18:34 Sep-06-2010
Re: Shot time calculator for Graphing Calculators
In Reply to Michel Couture at 14:53 Sep-06-2010 .

Yeah, we have some of those. I think they are around $100 though.

A couple of our radiographers went through source retrieval class in Louisiana, and one of the other students there had a radiographic shot calculator on his TI-83 calculator. Maybe its on the net some place.

 
 Reply 
 
LK
NDT Inspector,
Norway, Joined May 2008, 104

LK

NDT Inspector,
Norway,
Joined May 2008
104
21:19 Sep-06-2010
Re: Shot time calculator for Graphing Calculators
In Reply to Michel Couture at 14:53 Sep-06-2010 .

I'm still using the ruler, and I think it's really convenient. However I know guys from other lab, they make all calculations using this computer programm only.

 
 Reply 
 
Ian
Ian
18:44 Jun-26-2011
Re: Shot time calculator for Graphing Calculators
In Reply to David Bunch at 13:15 Sep-03-2010 (Opening).

I have it, post me if your interested

 
 Reply 
 
sbanner
NDT Inspector,
Canada, Joined Jan 2009, 31

sbanner

NDT Inspector,
Canada,
Joined Jan 2009
31
18:39 Jun-27-2011
Re: Shot time calculator for Graphing Calculators
In Reply to Ian at 18:44 Jun-26-2011 .

David:
there is a free and a paid RT calculator at http://www.ok-s.com/
also there is a iphone app called X-Ray timer avaliable.
Stan

 
 Reply 
 
NICK
NICK
14:14 Nov-11-2011
Re: Shot time calculator for Graphing Calculators
In Reply to David Bunch at 13:15 Sep-03-2010 (Opening).

Free Online TI-84 [url="http://graphingvariousfunctions.wordpress.com/2011/10/31/graphing-calculator-and-graphing-functions/"]Graphing Calculator for free[/url]?
I need one that is either...
--free and downloadable from a trustworthy source. (virus prevention purposes.)
or...
--free and non-downloadable and just available on a trusted website.

I need to be able to find the equation for the Line of Best Fit for a set of data, if that helps. Also, the equation for the L.o.B.F. is y=mx+b , correct?

Thanks-a-Bunch:)

 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window