where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

553 views
Technical Discussions
Luo Jianyuan
Engineering
China, Joined Feb 2001, 2

Luo Jianyuan

Engineering
China,
Joined Feb 2001
2
00:06 Oct-25-2001
Further study

I am intending to study NDT relevant major in US or Canada, but I can not find the NDT relevant major in university. Master programme is best, could you give me a hand? Thank you for your help.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:23 Oct-25-2001
Re: Further study
: I am intending to study NDT relevant major in US or Canada, but I can not find the NDT relevant major in university. Master programme is best, could you give me a hand? Thank you for your help.
.

To my knowledge there is no full fledged university course in Canada that offers NDT as a major or minor. Most Canadian Engineering faculties offer a major/minor in Metallurgical or Material Properties that may include miniscule amounts of NDT theory.

There are several Uni's in the USA and Great Britain that run NDT majors.

www.cnde.iastate.edu is a good starting point.




 
 Reply 
 
Luo Jianyuan
Engineering
China, Joined Feb 2001, 2

Luo Jianyuan

Engineering
China,
Joined Feb 2001
2
02:25 Oct-25-2001
Re: Further study
: : I am intending to study NDT relevant major in US or Canada, but I can not find the NDT relevant major in university. Master programme is best, could you give me a hand? Thank you for your help.
: .
.
: To my knowledge there is no full fledged university course in Canada that offers NDT as a major or minor. Most Canadian Engineering faculties offer a major/minor in Metallurgical or Material Properties that may include miniscule amounts of NDT theory.
.
: There are several Uni's in the USA and Great Britain that run NDT majors.
.
: www.cnde.iastate.edu is a good starting point.


Hi, David, you are right, originally my mojor is Corrosion and Pretection. Do you know anything about this major in US and Canada or any other university?
.



 
 Reply 
 
Chris Coughlin
Chris Coughlin
05:22 Oct-25-2001
Re: Further study
: I am intending to study NDT relevant major in US or Canada, but I can not find the NDT relevant major in university. Master programme is best, could you give me a hand? Thank you for your help.
.


From my own experience, most schools will have at least one professor and/or group that does NDT, but it's not necessarily labelled as such. For example, I was part of the Applied Magnetics Group at Queen's University, in the Physics Department, and my grad school work centred around magnetic flux leakage and remote field eddy current NDT.

So, your best bet may be to do a sort of reverse search for schools by searching on your interests in NDT (e.g. aspect or technique), and following the name trail that you come up with. Most searches on Google for a specific NDT technique for example will eventually return a link to a professor or research group's website, and from there you can check out the research and the school itself.

Good Luck!

Chris


 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window