where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
432 views
Technical Discussions
AxlZ AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:02 Nov-08-2001
Can I make coils sensor to use in wire rope inspection system?

If I want to detect localized faults by using coils sensor, Can I make them?
I want to know about
1. No. of coil (swg.)
2. core for coil(material)
3. No. of turns
4. directional
5. the important factors
6. flux density to saturate the rope (d=<50mm)
If can't tell me please guild line for me please.


Thank you very much.
AxlZ AekZ.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
07:13 Dec-12-2001
Re: Can I make coils sensor to use in wire rope inspection system?
: If I want to detect localized faults by using coils sensor, Can I make them?
: I want to know about
: 1. No. of coil (swg.)
: 2. core for coil(material)
: 3. No. of turns
: 4. directional
: 5. the important factors
: 6. flux density to saturate the rope (d=<50mm)
: If can't tell me please guild line for me please.
.
:
: Thank you very much.
: AxlZ AekZ.
.

Hi,

Please contact the man below who seems to invent the best wire rope equipment on the market.

http://www.ndt.net/article/v04n08/zawada/zawada.htm

Kazimierz Zawada
Zawada NDT, Tatarkiewicza 8, 41-819 Zabrze, Poland
Email: zawada@silesia.top.pl Fax: ++48 32 2752167 http://www.zawada.z.pl




 
 Reply 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window