where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
552 views
Technical Discussions
Gavin Biggs
Gavin Biggs
04:34 Nov-13-2001
Solder cavitation

Hi, I'm a design engineer working for a machining company in Buckinghamshire, England. I am researching various solder joining techniques, and for some experimental trials I need to create cavitations in molten solder that is preplaced between two induction heated flat aluminium plates. Rather than building an expensive ultrasonic test rig, does anyone know if a portable ultrasonic inspection unit would be capable of causing cavitation of the solder at the joint interface by inducing ultrasonic waves into the upper plate?

My knowledge of ultrasonics is very limited, so any advise you may have would be of great help.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:27 Nov-13-2001
Re: Solder cavitation
: Rather than building an expensive ultrasonic test rig, does anyone know if a portable ultrasonic inspection unit would be capable of causing cavitation of the solder at the joint interface by inducing ultrasonic waves into the upper plate?


I'm afraid not. Ultrasonic flaw detectors, thickness gages, and pulser/receivers designed for common nondestructive testing applications -- and the transducers used with them -- are low power devices which by design cause no discernable changes in the test piece through which the sound waves are passing. That's inherent in the definition of NDT. The power levels associated with these instruments are typically on the order of milliwatts per square centimeter with very brief pulse durations, power several orders of magnitude less than what you get from devices like ultrasonic homogenizers and ultrasonic cleaners. I'm afraid you're going to need the latter sort of approach to cause cavitation.

--Tom Nelligan
Panametrics, Inc.


 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window