where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1046 views
Technical Discussions
Atiq Ahmed Moghul
Atiq Ahmed Moghul
08:31 Dec-02-2001
Seeking for Joint venture for Ship thickness Survey Services in Pakistan

Dear Readers,

I am running a NDT services company in Pakistan from last 7 years with two more partners. I got a comprehensive experience of ship thickness survey, and worked for Emirates Industrial Laboratory (Dubai – UAE). Unfortunately we have not started yet the Ship Thickness Survey, since we are based in Pakistan and we don’t have any company pre-qualified by Lloyd or any other classification society, therefore we have vast chances of securing this business in Pakistan, as well as any where in the world, any serious company or individual who wants to be a business partner in this field with us is welcome. Please contact me at atiq_m@hotmail.com or raysndt@yahoo.com for further information.



 
 Reply 
 
Richard Kazares
Richard Kazares
02:00 Dec-02-2001
Re: Seeking for Joint venture for Ship thickness Survey Services in Pakistan
Please visit our website at www.ndtautomation.com and check the information about our Large Structure Inspection (LSI) System. This is an automated ultrasonic inspection scanner that can be configured for full, 2-dimentional C-Scan or linear B-Scan imaging-based inspections.

The scanner itself is magnetically attached to any carbon steel surface and can negotiate some pretty rough surfaces.

I can send you some photos of the system as used on the hull of an oil tanker with severe corrosion, where the system produced excellent UT thickness results (given the environment).

Please do not hesitate to contact me at rkazares@ndtautomation.com


 
 Reply 
 
Randy Plis
Sales, Consultant
AMDATA NDE Technology LLC, USA, Joined Oct 1999, 23

Randy Plis

Sales, Consultant
AMDATA NDE Technology LLC,
USA,
Joined Oct 1999
23
06:16 Dec-03-2001
Re: Seeking for Joint venture for Ship thickness Survey Services in Pakistan
I don't believe the gentleman was originally asking about equipment, but since it has been brought up there are alternatives to the Large Structure Inspection System.

A couple of options provided through the IntraSpect product line are the Navigator trackless scanner and the Catamaran scanner.

The Navigator is magnetically attached via its wheels to the hull. One version includes a lead screw style Y-arm to provide a 50 cm wide stroke along the entire scan length (up to 100 meters if base system not moved). Another version of the Navigator replaces the Y-axis lead screw with a rack & pinion that provides a 2 meter wide stroke along the same entire scan length.

The Catamaran scanner is more like a flexible gantry. It attaches to a given surface via vacuum cups and provides a 2 meter wide stroke, 1.2 meters long per section of X-axis track. Additional sets of X-axis track can be added for as long of a scan length as you desire.

Both automated scanners are associated with IntraSpect C-Scan imaging systems to provide concurrent A, B, and C-Scan views of acquired ultrasonic data. Eddy Current and Phased Array imaging can also be provided by the same system if desired.

Please e-mail me if you would like additional information.


 
 Reply 
 
Doug Mendes
NDT Inspector, R & D
Imetrix Inc., USA, Joined Oct 1999, 7

Doug Mendes

NDT Inspector, R & D
Imetrix Inc.,
USA,
Joined Oct 1999
7
07:01 Dec-03-2001
Re: Seeking for Joint venture for Ship thickness Survey Services in Pakistan
The company I currently work for has a robotic crawler that can measure thicknesses from 3.175mm to 50.8 mm looking for delaminations and corrosion wastage without the need for the ship to be removed from the water. We can pinpoint the position of all readings to within 6 inches of accuracy while collecting a high density of data to be formulated into a thorough report.We also carry current certifications through Lloyds Registry,US Navy,American Bureau of Shipping, and the US Coast Gaurd to perform hull survey inspections in-lieu of dry docking.


 
 Reply 
 
Kosmos-Kvant Corp.
Kosmos-Kvant Corp.
05:14 Dec-09-2001
Ship thickness
Hello,

Welcome www.uzk.ru

Best regards


 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window