where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
583 views
Technical Discussions
Nihat Kurkcu
Engineering
Turkey, Joined Jul 2001, 4

Nihat Kurkcu

Engineering
Turkey,
Joined Jul 2001
4
06:59 Dec-11-2001
NDE of Thermal Spray Coatings


I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
- Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
- Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...

Thanks,
Nihat
General Electric Marmara Research Center


 
 Reply 
 
Jonathan Buttram
Engineering
USA, Joined Nov 1999, 1

Jonathan Buttram

Engineering
USA,
Joined Nov 1999
1
07:14 Dec-11-2001
Re: NDE of Thermal Spray Coatings
:We have applied EMAT technology toward the a couple of thermal spray applications. The first is related to bond coating integrity and thickness measurement, and the second is the development of a real-time monitoring sensor used in the application of the medium. All of these applications utilize ultrasonic methods without the need for couplant. Please feel free to contact me at Innerspec Technologies if more information is required. Thanks,
Jonathan Buttram (jdbuttram@innerspec.com)

: I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
: - Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
: - Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...
.
: Thanks,
: Nihat
: General Electric Marmara Research Center
.



 
 Reply 
 
Xavier
Xavier
02:19 Dec-12-2001
Re: NDE of Thermal Spray Coatings
I worked on a 2 years project related to the detection of delamination in thermal spray coatings metals (ceramic on top of a superalloy base metal). I investigated the use of ultrasonic testing (mainly using Lamb waves) but also infrared thermography.

In some cases we were able to obtain interesting results, but these depended greatly on the surface finish of the ceramic coating.

Also, for most application it is not very suitable to use ultrasonic testing since a couplant (either water or gel) can actually infiltrate the ceramic and may remain within the material. So we were trying to develop a non-contact and couplant-free inspection technique.

Unfortunately, we (the only 2 researchers involved in this project) have left the research institute where the research was carried out and we haven't been replaced. So I don't know if the project is still running.

Neverthless, it is very challenging but interesting task.

Good luck !

:
: I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
: - Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
: - Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...
.
: Thanks,
: Nihat
: General Electric Marmara Research Center
.



 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window