where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

453 views
Technical Discussions
AxlZ AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:02 Nov-08-2001
Can I make coils sensor to use in wire rope inspection system?

If I want to detect localized faults by using coils sensor, Can I make them?
I want to know about
1. No. of coil (swg.)
2. core for coil(material)
3. No. of turns
4. directional
5. the important factors
6. flux density to saturate the rope (d=<50mm)
If can't tell me please guild line for me please.


Thank you very much.
AxlZ AekZ.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
07:13 Dec-12-2001
Re: Can I make coils sensor to use in wire rope inspection system?
: If I want to detect localized faults by using coils sensor, Can I make them?
: I want to know about
: 1. No. of coil (swg.)
: 2. core for coil(material)
: 3. No. of turns
: 4. directional
: 5. the important factors
: 6. flux density to saturate the rope (d=<50mm)
: If can't tell me please guild line for me please.
.
:
: Thank you very much.
: AxlZ AekZ.
.

Hi,

Please contact the man below who seems to invent the best wire rope equipment on the market.

http://www.ndt.net/article/v04n08/zawada/zawada.htm

Kazimierz Zawada
Zawada NDT, Tatarkiewicza 8, 41-819 Zabrze, Poland
Email: zawada@silesia.top.pl Fax: ++48 32 2752167 http://www.zawada.z.pl




 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window