where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
568 views
Technical Discussions
Nihat Kurkcu
Engineering
Turkey, Joined Jul 2001, 4

Nihat Kurkcu

Engineering
Turkey,
Joined Jul 2001
4
06:59 Dec-11-2001
NDE of Thermal Spray Coatings


I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
- Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
- Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...

Thanks,
Nihat
General Electric Marmara Research Center


 
 Reply 
 
Jonathan Buttram
Engineering
USA, Joined Nov 1999, 1

Jonathan Buttram

Engineering
USA,
Joined Nov 1999
1
07:14 Dec-11-2001
Re: NDE of Thermal Spray Coatings
:We have applied EMAT technology toward the a couple of thermal spray applications. The first is related to bond coating integrity and thickness measurement, and the second is the development of a real-time monitoring sensor used in the application of the medium. All of these applications utilize ultrasonic methods without the need for couplant. Please feel free to contact me at Innerspec Technologies if more information is required. Thanks,
Jonathan Buttram (jdbuttram@innerspec.com)

: I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
: - Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
: - Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...
.
: Thanks,
: Nihat
: General Electric Marmara Research Center
.



 
 Reply 
 
Xavier
Xavier
02:19 Dec-12-2001
Re: NDE of Thermal Spray Coatings
I worked on a 2 years project related to the detection of delamination in thermal spray coatings metals (ceramic on top of a superalloy base metal). I investigated the use of ultrasonic testing (mainly using Lamb waves) but also infrared thermography.

In some cases we were able to obtain interesting results, but these depended greatly on the surface finish of the ceramic coating.

Also, for most application it is not very suitable to use ultrasonic testing since a couplant (either water or gel) can actually infiltrate the ceramic and may remain within the material. So we were trying to develop a non-contact and couplant-free inspection technique.

Unfortunately, we (the only 2 researchers involved in this project) have left the research institute where the research was carried out and we haven't been replaced. So I don't know if the project is still running.

Neverthless, it is very challenging but interesting task.

Good luck !

:
: I would like to know if anybody has experience in NDE of Thermal Spray Coatings. I am looking for mainly:
: - Adhesive Bond Strenght Determination by Ultrasonics and/or other related NDE methods
: - Integrity of Thermal Spray Coatings: Determination of oxides, porosity, delaminations...
.
: Thanks,
: Nihat
: General Electric Marmara Research Center
.



 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window