where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

564 views
Technical Discussions
Peter Rost
Peter Rost
06:13 Dec-17-2001
X-ray tube for RT-inspection of heat exchanger welds

Dear colleagues,

I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate.
The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness.
I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld.
Do aou have any informations?

P. Rost


 
 Reply 
 
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 252

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
252
05:00 Dec-18-2001
Re: X-ray tube for RT-inspection of heat exchanger welds
You should also consider Isotopes for this requirement. Yb 169 or SE 75 may be alternatives. There are some suppliers out there that have developed special fixtures for the tube to tubesheet welds you describe.


: Dear colleagues,
.
: I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate.
: The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness.
: I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld.
: Do aou have any informations?
.
: P. Rost
.



 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window