where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

562 views
Technical Discussions
Peter Rost
Peter Rost
06:13 Dec-17-2001
X-ray tube for RT-inspection of heat exchanger welds

Dear colleagues,

I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate.
The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness.
I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld.
Do aou have any informations?

P. Rost


 
 Reply 
 
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 252

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
252
05:00 Dec-18-2001
Re: X-ray tube for RT-inspection of heat exchanger welds
You should also consider Isotopes for this requirement. Yb 169 or SE 75 may be alternatives. There are some suppliers out there that have developed special fixtures for the tube to tubesheet welds you describe.


: Dear colleagues,
.
: I`m looking for a x-ray tube for RT-welding inspection of heat exchanger tubes welded in the tube plate.
: The dimension of the tubes are appr. 10 to 50 mm in diameter and 1 to 6 mm in wall-thickness.
: I need a special X-ray tube to do the weld inspction from inside to outside of the tube to inspect the tube weld.
: Do aou have any informations?
.
: P. Rost
.



 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window