where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1099 views
Technical Discussions
s hasekamp
s hasekamp
00:59 Feb-02-2001
ndt in thailand

hi everyone,

I am researching the possibility to find a ndt job in thailand. Can anyone help me? I am looking for information about ndt companies located in thailand and expected salaries.
I have levels in eddy current and am specialised in inspecting tubes with eddy current and UT. Do I have any change to succeed?
Any other information or advice will be greatly appreciated.

Regards,

simon


 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
02:56 Feb-03-2001
Re: ndt in thailand
Simon,

I was working in Thailand in ’98 and I only left because the Asian economic crisis dried up all the work. The economic situation has gotten better however it still has a long way to go before the economy is booming again.

I have spent the past three years waiting for a Job to open back up in Thailand. It is very doubtful you could get a technician job in Thailand as the local technicians are very capable and of course cheaper than we expats. Most the jobs in Thailand and Asia will be for supervisory or management positions.

If you want to work overseas, you need luck and as qualifications I recommend Level III and/or API certs.

I will not say it's impossible, but at this moment it is very difficult.


Kindest Regards


Michael Trinidad
SGS Taiwan



 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
04:11 Feb-05-2001
Re: ndt in thailand



 
 Reply 
 
s hasekamp
s hasekamp
07:52 Feb-05-2001
Re: ndt in thailand
Michael,

Thank you very much for the useful information

Kind regards,

Simon


 
 Reply 
 
G. Ganesh Raju
G. Ganesh Raju
07:28 Feb-09-2001
Re: ndt in thailand



 
 Reply 
 
Kyle Wintz
Kyle Wintz
02:04 Dec-19-2001
Re: ndt in thailand
Level II in RT, UTT, MT, PT, and PMI, have diploma from Hutchinson Technical college in NDT.


 
 Reply 
 
bykov.s.p
Consultant
Russia, Joined Apr 2001, 1

bykov.s.p

Consultant
Russia,
Joined Apr 2001
1
00:01 Dec-31-2001
Re: ndt in thailand

: Level II in RT, UTT, MT, PT, and PMI, have diploma from Hutchinson Technical college in NDT.
.
Level III USD, III AE


 
 Reply 
 

Product Spotlight

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window