where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

PBP Optel sp. z o.o.
Weare searching new ways - in ultrasonic techniques- in creation of new productsUltrasonic instruments - Ultrasonic Testing Card
742 views
Technical Discussions
Erika
Erika
01:47 Jan-09-2002
ACFM

I am currently in NDI and am seeking certification in ACFM.
Does anyone have any input on the best place to obtain this?
Thanks!


 
 Reply 
 
Guido Crapels
Guido Crapels
01:52 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
__________________________
We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
http://www.tscuk.demon.co.uk/tschome.htm


 
 Reply 
 
Martin Lugg
Consultant,
TSC Inspection Systems, United Kingdom, Joined Nov 2000, 27

Martin Lugg

Consultant,
TSC Inspection Systems,
United Kingdom,
Joined Nov 2000
27
02:35 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
.
Training courses leading to operator certification are available from the UK Welding Institute (TWI). These are routinely run in Middlesbrough, UK, but can also be run overseas if there is sufficient demand.

Please contact Jim Sheppard at TWI North:
JSheppard@twi.co.uk
Tel: +44 1642 210512



 
 Reply 
 
Joel Light
Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc., USA, Joined Jul 2002, 12

Joel Light

Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc.,
USA,
Joined Jul 2002
12
03:23 Jul-31-2002
Re: ACFM
: : I am currently in NDI and am seeking certification in ACFM.
: : Does anyone have any input on the best place to obtain this?
: : Thanks!
: __________________________
: We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
: http://www.tscuk.demon.co.uk/tschome.htm
.
___________________________________________
There is a NDT Training center in Houston, TX that offers ACFM Certification courses.
Hellier Training Institute.
Not sure if this is still the correct phone number but try (281) 873-0980



 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window