where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

649 views
Technical Discussions
TQCC
TQCC
03:31 Jan-24-2002
On-line Ultrasonic Inspection of Billets

We search for ultrasonic techniques and available equipment for
on-line ultrasonic inspection of bars and billets.


 
 Reply 
 
Frederick Beck
Frederick Beck
04:42 Jan-24-2002
Re: On-line Ultrasonic Inspection of Billets

: We search for ultrasonic techniques and available equipment for
: on-line ultrasonic inspection of bars and billets.
.

Hello:

This is Tac Technical Instrument Corp in Trenton, NJ USA. We manufacture ultrasonic inspection systems for tubes, bars and billets. Our web page can be found at www.tactictest.com.

Please contactact us for additional information.

Regards,
Fred Beck


 
 Reply 
 
Hertlin
Hertlin
00:06 Jan-25-2002
Re: On-line Ultrasonic Inspection of Billets
: We search for ultrasonic techniques and available equipment for
: on-line ultrasonic inspection of bars and billets.
.
This might be a good application for acoustic resonant testing! Please specify what type of defects you are looking for.
Best regards
Ingolf Hertlin

RTE Akustik + Prueftechnik GmbH
76327 Pfinztal / Karlsruhe
Germany


 
 Reply 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window