where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1244 views
Technical Discussions
Amry Amin
R & D
Malaysian Inst. for Nuclear Technology Research, Malaysia, Joined Aug 2002, 4

Amry Amin

R & D
Malaysian Inst. for Nuclear Technology Research,
Malaysia,
Joined Aug 2002
4
09:14 Sep-30-2004
Utrasonic probe assessment

Hi everybody,

Besides than ASTM E1065, does anyone knows of standards or procedures of assessing UT probes. Can anyone help.


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
02:42 Sep-30-2004
Re: Utrasonic probe assessment
Hello,

please take a look at
European Standard EN 12668-2
Nondestructive Testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes

Kind reards



 
 Reply 
 
M.Margolin
M.Margolin
06:23 Apr-20-2006
Testing a temporal resolution
----------- Start Original Message -----------
Which generator to use in EN 12668 # 8.4.7?
What are the waveforms for these measurements?

Regards,

M.Margolin


 
 Reply 
 
Khairul
Khairul
10:34 Jun-28-2011
Re: Utrasonic probe assessment
In Reply to Udo Schlengermann at 02:42 Sep-30-2004 .

Hello all,Any idea where i can sent my UT probe for calibration service as per EN 12668-1 requirement

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
10:47 Jun-30-2011
Re: Utrasonic probe assessment
In Reply to Khairul at 10:34 Jun-28-2011 .

Dear colleagues,
there must be a misunderstanding:

Ultrasonic probes are covered by EN 12668-2 (not by part 1 which is for ultrasonic isntruments only).

Periodical checks are only required for instruments (part 1), not for probes (part 2).

Best regards

Udo Schlengermann

 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window