where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
315 views
Technical Discussions
Jaques Townsend
NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç, Brazil, Joined Mar 2001, 13

Jaques Townsend

NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç,
Brazil,
Joined Mar 2001
13
00:25 Feb-02-2002
Looking for used parabolic dish UWC-2000 concentrator for Ultraprobe

Parabolic dish, ultrasound wave concentrator UWC-2000 model, manufactured by UE Systems; must to be in perfect conditions.

All offerings are wellcome by e-mailing to
townsend@hotlink.com.br


I`m also needing to print ultrasonic noise detected by graphic data recordings.
Can you suggest me how to adapt a graphic recorder and a printer to make the TPM field reporting when using the ultrasonic ULTRAPROBE 2000 like at Leak Detection, Bearing & Mechanical Inspection, Electrical Inspection, Valve & Steam Trap Inspection, Heat Exchangers & Boilers and Condensers,
Compressor Inspection or Wind Noise & Water Leak Detection ???
All helps are wellcome.

Thanks,
Jaques




    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window