where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

662 views
Technical Discussions
Richard Ledingham
Richard Ledingham
02:15 Feb-05-2002
In-Service Steel Tank Floor Inspections

Looking for Inspection Techniques/Methods for the inspection of Steel Tank Floors without taking the tanks out of service. I am aware of Acoustic Emission, TANKPAC etc... but, are there any new techniques out there? Long Range UT, ACFM?!? Any of these able to do the job?


 
 Reply 
 
rajeev chaudhari
NDT Inspector
offshore testing & inspection services (I) pvt ltd, India, Joined Dec 2000, 17

rajeev chaudhari

NDT Inspector
offshore testing & inspection services (I) pvt ltd,
India,
Joined Dec 2000
17
04:37 Feb-05-2002
Re: In-Service Steel Tank Floor Inspections
You can contact pndt for your need. Pndt has carried out extensive work in tank inspection. If you need any further details you may contact me at otislab@vsnl.net
Regards,
R.J.Chaudhari
otislab@vsnl.net



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
05:59 Feb-19-2002
Re: In-Service Steel Tank Floor Inspections
You really need to look at what you want to achieve.

All of the techniques you mention have some role to play in an on-stream storage tank inspection. They all also have limitations.

If you want in inservice snapshot of the condition of a tank floor in service you are probably limited to Acoustic Emission or an In Service Tank Robot.

Differing methods in terms of data and cost so you need to examine cost benefit analysis.

You could start with an RBI study and then apply in service techniques on high risk.

If annular problems are suspected long range ultrasonics will fill a need.

For more information consider attending Asia Bulk Liquid Storage Tanks & Terminals March 26/27 Singapore check www.ibc-asia com/bulkliquid.htm


 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window