where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
1753 views
Technical Discussions
EVA GONZALEZ
EVA GONZALEZ
07:45 Feb-05-2002
Equivalence between EN4179 and SNT-TC-1A

Sorry if the question seems to be obvious but I am quite new in this business:I have an inspector qualified by ASNT SNT-TC-1A but Joint aviation regulation-145 (JAR-145) tells me to be qualified against EN 4179. Which are the differences? On aviation industry, Could it be considered equivant?.
Thanks in adavance.
Best reagards

I have corrected my e-mail address....


 
 Reply 
 
Dave Wilkes
Dave Wilkes
08:25 Feb-06-2002
Re: Equivalence between EN4179 and SNT-TC-1A
No need to apologise Eva, those of us who have been in
this industry for many years, are still trying to understand the various qualification schemes and their
equivalences.

My first thoughts would be that your ASNT operator would not be EN 4173 approved, unless he had attended
and qualified on a EN 4173 approved course.

But the final say is normally with your client who in
most instances can choose to accept alternative
qualifications.

There is an article on EN 4173 on this website that
you might find useful.

http://www.ndt.net/article/ecndt98/aero/056/056.htm

Regards

Dave Wilkes
Asst Editor
www.ndtcabin.com "The internet magazine for ndt professionals"



 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 177

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
177
04:21 Feb-06-2002
Re: Equivalence between EN4179 and SNT-TC-1A
Reply by Udo Schlengermann:

this is only to give the correct document titles:

The question is related to the following standards:

1. ASNT-TC-1A (2001)
Recommended Practice (guideline for employers to establish their own written practice for the qualification and certification of NDT personnel.

2. ANSI/ASNT-CP-189 (1995)
Standard for qualification and certification of nondestructive testing personnel.

3. EN 4179 (2000)
Aerospace series - Qualification and approval of personnel for nondestructive testing.

4. EN 473 (1993)
Qualification and certification of NDT personnel.

5. ISO 9712 (1992)
Nondestructive testing - Qualification and certification of personnel.

Kind regards
Udo Schlengermann
Agfa NDT GmbH
Robert-Bosch-Strasse 3
D-50354 Hürth
Tel.+49 (0) 2233-601-550
Fax +49 (0) 2233-601-402
email uschlengermann@krautkramer.de
~~~

: Sorry if the question seems to be obvious but I am quite new in this business:I have an inspector qualified by ASNT SNT-TC-1A but Joint aviation regulation-145 (JAR-145) tells me to be qualified against EN 4179. Which are the differences? On aviation industry, Could it be considered equivant?.
: Thanks in adavance.
: Best reagards
.
: I have corrected my e-mail address....
.



 
 Reply 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window