where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
1749 views
Technical Discussions
EVA GONZALEZ
EVA GONZALEZ
07:45 Feb-05-2002
Equivalence between EN4179 and SNT-TC-1A

Sorry if the question seems to be obvious but I am quite new in this business:I have an inspector qualified by ASNT SNT-TC-1A but Joint aviation regulation-145 (JAR-145) tells me to be qualified against EN 4179. Which are the differences? On aviation industry, Could it be considered equivant?.
Thanks in adavance.
Best reagards

I have corrected my e-mail address....


 
 Reply 
 
Dave Wilkes
Dave Wilkes
08:25 Feb-06-2002
Re: Equivalence between EN4179 and SNT-TC-1A
No need to apologise Eva, those of us who have been in
this industry for many years, are still trying to understand the various qualification schemes and their
equivalences.

My first thoughts would be that your ASNT operator would not be EN 4173 approved, unless he had attended
and qualified on a EN 4173 approved course.

But the final say is normally with your client who in
most instances can choose to accept alternative
qualifications.

There is an article on EN 4173 on this website that
you might find useful.

http://www.ndt.net/article/ecndt98/aero/056/056.htm

Regards

Dave Wilkes
Asst Editor
www.ndtcabin.com "The internet magazine for ndt professionals"



 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 177

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
177
04:21 Feb-06-2002
Re: Equivalence between EN4179 and SNT-TC-1A
Reply by Udo Schlengermann:

this is only to give the correct document titles:

The question is related to the following standards:

1. ASNT-TC-1A (2001)
Recommended Practice (guideline for employers to establish their own written practice for the qualification and certification of NDT personnel.

2. ANSI/ASNT-CP-189 (1995)
Standard for qualification and certification of nondestructive testing personnel.

3. EN 4179 (2000)
Aerospace series - Qualification and approval of personnel for nondestructive testing.

4. EN 473 (1993)
Qualification and certification of NDT personnel.

5. ISO 9712 (1992)
Nondestructive testing - Qualification and certification of personnel.

Kind regards
Udo Schlengermann
Agfa NDT GmbH
Robert-Bosch-Strasse 3
D-50354 Hürth
Tel.+49 (0) 2233-601-550
Fax +49 (0) 2233-601-402
email uschlengermann@krautkramer.de
~~~

: Sorry if the question seems to be obvious but I am quite new in this business:I have an inspector qualified by ASNT SNT-TC-1A but Joint aviation regulation-145 (JAR-145) tells me to be qualified against EN 4179. Which are the differences? On aviation industry, Could it be considered equivant?.
: Thanks in adavance.
: Best reagards
.
: I have corrected my e-mail address....
.



 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window