where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
2134 views
Technical Discussions
V K Dilip
Consultant
Industrial Support Services, Saudi Arabia, Joined Jan 2001, 8

V K Dilip

Consultant
Industrial Support Services,
Saudi Arabia,
Joined Jan 2001
8
01:25 Jul-24-2001
Robotic Tank Floor Scanning

Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?





 
 Reply 
 
Richard Kazares
Richard Kazares
06:17 Jul-24-2001
Re: Robotic Tank Floor Scanning
: Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
.
.NDT Automation's Large Structure Inspection (LSI) system can provide 100% UT coverage of tank floors on a fully automated basis. The system is not designed to be used while the tank is full, however - but it does minimize the total time needed to perform a 100% UT tank floor corrosion survey - quantitatively (NOT qualitatively like some other technologies). The LSI system produces real numbers in a highly usable spreadsheet format.

Hope this is of help to you.

If you wish - you can follow the URL link shown with this reply to www.ndtautomation.com and click on the LSI system.



 
 Reply 
 
Matt Clark
Matt Clark
08:27 Jul-24-2001
Re: Robotic Tank Floor Scanning
: Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
. You can evaluate the tank floor condition by using acoustic emission.This can be operated whilst the tank is in service. Their are a few conditions:
1. The content of the tank must not have changed within the last 6-12months.
2. The tank should not have been cleaned in the last 12 months
3. The 'flow' in and from the tank must be shut down at least 24 hours prior to the test.
4. There are some enviromental limits also i.e heavy rain or elevated temperatures can hinder the results.
5. Access around the full perimiter of the tank must be available and local areas of insulation need to be removed to access probe points.
.Note the survey will confirm thickness but has and does confirm condition and proffesional evaluation can determine if a follow up intrusive survey is required.



 
 Reply 
 
Matt Clark
Matt Clark
08:29 Jul-24-2001
Re: Robotic Tank Floor Scanning
: : Does anyone know about a robotic tank floor inspection device, which can inspect tankfloors whilst the tank is in service?
: . You can evaluate the tank floor condition by using acoustic emission.This can be operated whilst the tank is in service. Their are a few conditions:
: 1. The content of the tank must not have changed within the last 6-12months.
: 2. The tank should not have been cleaned in the last 12 months
: 3. The 'flow' in and from the tank must be shut down at least 24 hours prior to the test.
: 4. There are some enviromental limits also i.e heavy rain or elevated temperatures can hinder the results.
: 5. Access around the full perimiter of the tank must be available and local areas of insulation need to be removed to access probe points.
: .Note the survey will not confirm thickness but has and does confirm condition and proffesional evaluation can determine if a follow up intrusive survey is required.
.PLEASE NOTE CHANGE - '****NOT CONFIRM THICKNESS****



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
01:52 Jul-24-2001
Re: Robotic Tank Floor Scanning
There are three established robots
InTank USA
SOLEX Robotics USA
Raytheon Engineers USA

Additionally there is a Franco/German project with little reported track record and a new European Funded Development Project with South Bank University UK.
The first three have practical experience. Be aware that the robots have limitations on types of product, tank cleanliness etc. and are not generally aimed at heavy crude oil tanks.
The tools are also very expensive and as such a statistical sampling approach is used. You should study litreature as to the pros and cons of statistical sampling of tank floors. Whilst some operators favour this approach there are a number of reported tank failures subsequent to statistical sampled floor inspection.

Other operators are using the approach of ranking tank floor condition with Acoustic Emission and then sending the robot to the areas of damage identified by the AE. This package inspection removes the concern with statistical sampling.


 
 Reply 
 
Rob Salvatore
Rob Salvatore
03:04 Aug-28-2001
Resources in Oz? Re: Robotic Tank Floor Scanning
: There are three established robots
: InTank USA
: SOLEX Robotics USA
: Raytheon Engineers USA
.

Just curious whether anyone knows whether there are any of these robotic tank floor scanners in Australia, or easy access to Australia?

Thanks.
Rob Salvatore
robDOTsalvatoreHAT[remove"h"]qenosDOTTY[remove "ty"]com


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
08:20 Aug-30-2001
Re: Resources in Oz? Re: Robotic Tank Floor Scanning
Rob,

During our work on the CD-ROM of the 10th Asia Pacific Conf. on NDT
I noticed a paper which may help you.

"Life Management Of Above Ground Atmospheric Storage Tanks"
C.J. Moss, RR Griffiths, A Bishop, M Dinon
Contact: harry.moss@santos.com.au"

The complete CD-ROM will be published in our October issue.

Best regards,
Rolf Diederichs

-------
: : There are three established robots
: : InTank USA
: : SOLEX Robotics USA
: : Raytheon Engineers USA
: .
.
: Just curious whether anyone knows whether there are any of these robotic tank floor scanners in Australia, or easy access to Australia?
.
: Thanks.
: Rob Salvatore
: robDOTsalvatoreHAT[remove"h"]qenosDOTTY[remove "ty"]com





 
 Reply 
 
alborz
alborz
02:48 Sep-27-2001
Re: Robotic Tank Floor Scanning
i have a project about deminer robot


 
 Reply 
 
van Cuyck / a2ms
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

van Cuyck / a2ms

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
04:25 Sep-27-2001
Re: Robotic Tank Floor Scanning
: i have a project about deminer robot
.

And what else?


 
 Reply 
 
ali
ali
03:03 Nov-21-2001
Re: Robotic Tank Floor Scanning
: i have a project about deminer robot
.
if u can help me,send me a mail


 
 Reply 
 
Majid
Majid
08:38 Feb-24-2002
Re: Robotic Tank Floor Scanning
Hi.
i have a project about deminer robot
and i want to khnow that can you help me.
tanks



 
 Reply 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window