where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1394 views
Technical Discussions
Alan Desgrange
Engineering, Quality Engineer
Siemens, USA, Joined Mar 2002, 1

Alan Desgrange

Engineering, Quality Engineer
Siemens,
USA,
Joined Mar 2002
1
06:42 Mar-07-2002
TFI Corporation - ???????

Has anyone heard of TFI Corporation which produced NDT x-ray equipment at least in the 1980's? If so, is the company still in business or does it currently have another name?

Thanks for any help,

Alan Desgrange


 
 Reply 
 
Troy Foster
Engineering, X-ray Inspection Systems
Willick Engineering Company, USA, Joined Feb 2000, 6

Troy Foster

Engineering, X-ray Inspection Systems
Willick Engineering Company,
USA,
Joined Feb 2000
6
07:40 Mar-07-2002
Re: TFI Corporation - ???????
: Has anyone heard of TFI Corporation which produced NDT x-ray equipment at least in the 1980's? If so, is the company still in business or does it currently have another name?
.
: Thanks for any help,
.
: Alan Desgrange
TFI was Technology For Industry in New Haven CT. Willick Engineering was their western representative. TFI are out of business. Willick supports their equipment in the US. For more info http://www.willick.com

Troy




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window