where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

634 views
Technical Discussions
I A Macd
I A Macd
04:28 Oct-12-1998
NDT of flexible Risers

Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
Thank you in advance




 
 Reply 
 
Sergei Tsarik
Sergei Tsarik
04:59 Nov-14-1998
Re: NDT of flexible Risers
: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

Dear Sir,

We have carry out experimental rearch on rubber samples.
We studied the mechanical properties (elastic modulus,
loss factor) for these samples.
For further information ask Sergei Tsarik,
sergei.v.tsarik@usa.net


 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
03:12 Nov-16-1998
Re: NDT of flexible Risers

: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

-------------------------

Dear I A Macdonald ,

Can you be a little more specific on:
1) Material of the flexible risers
2) Size and Dimensions
3) What type of flaws are you looking for?
4) What passes through the risers?

My company builds Laser Based Inspection equipment which is used a lot in risers and headers in refinery plants. The material is typically carbon steel. You mentioned flexable risers, so I assume yours are rubber or simular material. If you can pass along more detailed information, I may be able to help you.

Regards,
Richard D. Roberts



 
 Reply 
 
Gordon Dover (RTD Engineering inspection Service)
Gordon Dover (RTD Engineering inspection Service)
00:52 Nov-17-1998
Re: NDT of flexible Risers

: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

Dear I A MacDonald,
I was interested to read you question. RTD have been heavily involved in the inspection of flexible risers and flowline for the past twenty years (both metal polymer and rubber bonded types). If you could clearly specify what you are trying to achieve we may be in a possition to help. Please advise if you have any specific manufacturers product in mind. We are fully conversant with all types currently avaible on the market.

Best regards

Gordon Dover.


 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window