where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
613 views
Technical Discussions
I A Macd
I A Macd
04:28 Oct-12-1998
NDT of flexible Risers

Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
Thank you in advance




 
 Reply 
 
Sergei Tsarik
Sergei Tsarik
04:59 Nov-14-1998
Re: NDT of flexible Risers
: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

Dear Sir,

We have carry out experimental rearch on rubber samples.
We studied the mechanical properties (elastic modulus,
loss factor) for these samples.
For further information ask Sergei Tsarik,
sergei.v.tsarik@usa.net


 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
03:12 Nov-16-1998
Re: NDT of flexible Risers

: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

-------------------------

Dear I A Macdonald ,

Can you be a little more specific on:
1) Material of the flexible risers
2) Size and Dimensions
3) What type of flaws are you looking for?
4) What passes through the risers?

My company builds Laser Based Inspection equipment which is used a lot in risers and headers in refinery plants. The material is typically carbon steel. You mentioned flexable risers, so I assume yours are rubber or simular material. If you can pass along more detailed information, I may be able to help you.

Regards,
Richard D. Roberts



 
 Reply 
 
Gordon Dover (RTD Engineering inspection Service)
Gordon Dover (RTD Engineering inspection Service)
00:52 Nov-17-1998
Re: NDT of flexible Risers

: Can anyone out there help me with a general enquiry. I am looking for information on the inspection of flexible risers, either internal or external. If there is any research being carried out in this subject, or if there is an accepted piece of equipment, I would be interested.
: Thank you in advance

Dear I A MacDonald,
I was interested to read you question. RTD have been heavily involved in the inspection of flexible risers and flowline for the past twenty years (both metal polymer and rubber bonded types). If you could clearly specify what you are trying to achieve we may be in a possition to help. Please advise if you have any specific manufacturers product in mind. We are fully conversant with all types currently avaible on the market.

Best regards

Gordon Dover.


 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window