where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2027 views
Technical Discussions
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1285

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1285
03:39 Jan-19-2004
ISO 13847:2000 Porosity and UT

I have just purchased my copy of the ISO standards 13847 Petroleum and natural gas industries - Pipeline transportation systems-Welding of pipelines.
The NDT requirements for testing are reasonably typical and I have no issues with them. However, the ultrasonic acceptance criteria for workmanship has a statement that for nonplanar indications which cover a projected area of not more than 2% on the radiograph shall be considered acceptable. (But this is in the Ultrasonic Acceptance Criteria Section 9.5 and there is no radiograph!)
It also allows that porosity indications may be treated as planar.

This does not seem very helpful to an ultrasonic technician.
It implies that ultrasonic assessment is to be made look like radiography. Although porosity and slag may be evaluated as planar the connection to a 2% projected area has little to do with ultrasonic assessment. (I have also noted that 2% projected area is rarely quantifiable even by experienced radiographers).

How did the ISO committeerationalise this kind of wording for ultrasonic testing? There is a contact in Geneva for problems with the file format but there is no instructions on who to contact when there is a techncal issue like making ultrasonic result equate to radiography.

Does anyone have a suggestion or contact route?
Regards
Ed



 
 Reply 
 
Sasaki
Sasaki
01:28 Jan-20-2004
Re: ISO 13847:2000 Porosity and UT
I wonder if this could be helpful, but please see

http://www.iso.ch/iso/en/xsite/contact/contact.html

My personal guess to your posting is that the stipulation of radiograph is made in case of dispute regarding interpretation of UT echo signal with regard to sizing the flaw.
That means, final interpretation should be made by radiograph since UT is inadequate method of "permanent record".

I maybe wrong but wish helpful.


 
 Reply 
 
HAREESH KUMAR
HAREESH KUMAR
07:00 Nov-20-2011
Re: ISO 13847:2000 Porosity and UT
In Reply to Ed Ginzel at 03:39 Jan-19-2004 (Opening).

My opinion is like ASME, ISO13847 should create an acceptance criteria specifically for Ultrasonic Examination instead of refering to the Radiographic acceptance paragraph, which makes more confusion in establishing Ultrasonic acceptance standard.
Regards,
HAREESH KUMAR

 
 Reply 
 
standards
standards
13:16 Nov-22-2011
Re: ISO 13847:2000 Porosity and UT
In Reply to Ed Ginzel at 03:39 Jan-19-2004 (Opening).

This International Standard specifies the requirements for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems for the petroleum and natural gas industries meeting the requirements of ISO 13623.

http://www.bsb.co.in/

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
16:20 Nov-23-2011
Re: ISO 13847:2000 Porosity and UT
In Reply to Ed Ginzel at 03:39 Jan-19-2004 (Opening).

Ed

you are correct its nonsense and was not fixed on the 2001 correction. I question why anyone is using a standard more than a decade old which means the wording is probably 12 or more years old in a fast moving technology environment.

I believe this standard falls under TC 67/SC2 Current Chair is Dennis Tikhomirov. You could send your inquiry through Mrs Kirsi Silander silander@iso.org

Good luck if you get anything positive please post here to help close the loop.

 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window