where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
654 views
Technical Discussions
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
00:03 Mar-26-2002
Multimedia Training CDROM on NDT

SIMULA, Italian Company leader on Multimedia Training, announce the realization of 4 multimedia training CDROM on NDT, methods MT, PT RT, UT.
The multimedia training CDROMS on NDT from SIMULA are a useful vehicle for basic training, for both future field operators and teachers who can project them in the classroom during lessons.
Some of the leading Italian companies (in the automobile, oil and rail industries) and NDT training centres use them for their in-house training and as support material for their teachers.
Demo are available at the address:
http://www.simula.it/Simula-En/Prodotti.htm


 
 Reply 
 
satish sharma
satish sharma
06:59 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Kindly send in the information about ur product
We wil be interested in it.
Thanks
satish


 
 Reply 
 
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
02:48 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Our international distributor (www.sonatest-plc.com) will send you the requested information about our NDT cdrom.
Meantime, you can read information on our web site at this address: http://www.simula.it/Simula-En/Prodotti.htm
Best regards.
Fiorenzo Sorcinelli

.



 
 Reply 
 
Satish Sharma
Satish Sharma
08:47 May-09-2002
signal analysis using spectrum analyser
: Kindly send in the information about signal analysis using spectrum analyser. I would like the signal to be displayed on the monitor in real time measurements using an ADC card.
Thanks
satish



 
 Reply 
 
D. Robert Hay
Engineering,
TISEC Inc., Canada, Joined Apr 2002, 3

D. Robert Hay

Engineering,
TISEC Inc.,
Canada,
Joined Apr 2002
3
09:25 May-09-2002
Re: signal analysis using spectrum analyser
You may be interested in a couple of our products for NDT signal analysis, ICEPak for analyses that are much more powerful than simple spectral analysis and the MM Pattern Recognition Manual. Check out ICEPak at www.supericepak.com and the PR Manual at http://www.tisec.com/products/matlibe/pattern_recognition.htm


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window