where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

694 views
Technical Discussions
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
00:03 Mar-26-2002
Multimedia Training CDROM on NDT

SIMULA, Italian Company leader on Multimedia Training, announce the realization of 4 multimedia training CDROM on NDT, methods MT, PT RT, UT.
The multimedia training CDROMS on NDT from SIMULA are a useful vehicle for basic training, for both future field operators and teachers who can project them in the classroom during lessons.
Some of the leading Italian companies (in the automobile, oil and rail industries) and NDT training centres use them for their in-house training and as support material for their teachers.
Demo are available at the address:
http://www.simula.it/Simula-En/Prodotti.htm


 
 Reply 
 
satish sharma
satish sharma
06:59 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Kindly send in the information about ur product
We wil be interested in it.
Thanks
satish


 
 Reply 
 
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
02:48 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Our international distributor (www.sonatest-plc.com) will send you the requested information about our NDT cdrom.
Meantime, you can read information on our web site at this address: http://www.simula.it/Simula-En/Prodotti.htm
Best regards.
Fiorenzo Sorcinelli

.



 
 Reply 
 
Satish Sharma
Satish Sharma
08:47 May-09-2002
signal analysis using spectrum analyser
: Kindly send in the information about signal analysis using spectrum analyser. I would like the signal to be displayed on the monitor in real time measurements using an ADC card.
Thanks
satish



 
 Reply 
 
D. Robert Hay
Engineering,
TISEC Inc., Canada, Joined Apr 2002, 3

D. Robert Hay

Engineering,
TISEC Inc.,
Canada,
Joined Apr 2002
3
09:25 May-09-2002
Re: signal analysis using spectrum analyser
You may be interested in a couple of our products for NDT signal analysis, ICEPak for analyses that are much more powerful than simple spectral analysis and the MM Pattern Recognition Manual. Check out ICEPak at www.supericepak.com and the PR Manual at http://www.tisec.com/products/matlibe/pattern_recognition.htm


 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window