where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
11070 views
Articles & News
EAB
EAB
21:41 Aug-09-2011
Computed Radiography and Artifacts
Overall
Style
Insight
Reliability

Great info!

 
 Reply 
 
Tyler
NDT Inspector,
GE Inspection Technologies , USA, Joined May 2011, 24

Tyler

NDT Inspector,
GE Inspection Technologies ,
USA,
Joined May 2011
24
21:54 Aug-09-2011
Re: Computed Radiography and Artifacts
In Reply to EAB at 21:41 Aug-09-2011 (Opening).

zoom image



Another CR artifact pic...this one resulting from a minute scratch that was not easily seen unfiltered or enhanced but with maximum filtering it stands out quit well. If CR systems are set-up to automatically filter (more of a maximum) displayed images, the interpreter may not view this as an artifact!!!
 
 Reply 
 
Justin Byers
Justin Byers
02:11 Dec-07-2011
Re: Computed Radiography and Artifacts
In Reply to Tyler at 21:54 Aug-09-2011 .

Hello Tyler
Do you see many wear marks on your image plates from handling/scanning?
We use CR and have seen indications like the one you highlighted below.
What kind of life are you getting out of the plates?

This is my first time using this site, and am suprised they're aren't more threads dealing with image plate artifacts. This is a major concern here at work as we are at the cusp of moving towards DDA/CR and away from film.

Any info would be great!

Jb

 
 Reply 
 
Tyler
NDT Inspector,
GE Inspection Technologies , USA, Joined May 2011, 24

Tyler

NDT Inspector,
GE Inspection Technologies ,
USA,
Joined May 2011
24
20:55 Jan-13-2012
Re: Computed Radiography and Artifacts
In Reply to Justin Byers at 02:11 Dec-07-2011 .

In regards to your question and concern, we have experienced wear marks on our IP’s but that was with the halo-type portable scanners, any scanner that has direct contact in anyway with the IP’s will reduce the life of the imaging plate. Try to scan the IP's in different locations on the halo types to reduce wear on the rollers of the transport unit.

We have moved away from those type scanners. We have also put a lot of quality controls in place and have been successful in eliminating artifacts observed in the images.

The life dependency on the IP depends on the handling…they can last one to two weeks or last well over 500 exposures, just depends on how careful ALL employees handle them. It seems like every plate manufacturer has a different design in the protective coating. For example one has the best (thickest) protective coating but those results in a loss of resolution. Others have a thinner protective coating which is more prone to damage but the resolution is much better. Just depends on your preference and application.

As long as there is good QC measures put in place your IP’s should last and artifacts should be reduced.

DR is great but I have had clients experience problems in the field with the cables/connections, technicians being to rough on the PC style connections. Manufactures still haven’t addressed these issues so we have had to upgrade on the screws and cables…no big deal though. DR should be wireless in a few more years as the medical industry has a wireless panel available.

I have some suggestions I could send you regarding IP care you if send me your email...the one displayed came back undeliverable.

 
 Reply 
 
David
David
13:18 Jan-16-2012
Re: Computed Radiography and Artifacts
In Reply to Tyler at 20:55 Jan-13-2012 .

Hi All,
I agree with Tyler that DR is sometomes cumbersome due to a cables.
Vidisco ltd has a wireless DR system, it is very much worth looking into.
http://www.vidisco.com/NDTMain.asp

 
 Reply 
 
Tom
NDT Inspector
USA, Joined Jan 2011, 1

Tom

NDT Inspector
USA,
Joined Jan 2011
1
01:10 Jan-17-2012
Re: Computed Radiography and Artifacts
In Reply to David at 13:18 Jan-16-2012 .

What type of plates are you using?

 
 Reply 
 
Tyler
NDT Inspector,
GE Inspection Technologies , USA, Joined May 2011, 24

Tyler

NDT Inspector,
GE Inspection Technologies ,
USA,
Joined May 2011
24
13:08 Feb-29-2012
Re: Computed Radiography and Artifacts
In Reply to Tom at 01:10 Jan-17-2012 .

Mainly GE, but for other contracts we use Fuji and Kodak.

 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window