where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1011 views
Technical Discussions
eron
Worldwide, Joined Nov 2011, 5

eron

Worldwide,
Joined Nov 2011
5
00:29 Jan-19-2012
material testing

Members
What standard do you use for checking the elemental composition of stainless steels. What ranges for the different elements. I want to have a document that confirms what PMI or the MTR's give me.


thank you for your reply
Eron

 
 Reply 
 
Hari Kishore
NDT Inspector,
Sievert Group of Companies, India, Joined Nov 2011, 14

Hari Kishore

NDT Inspector,
Sievert Group of Companies,
India,
Joined Nov 2011
14
10:10 Jan-19-2012
Re: material testing
In Reply to eron at 00:29 Jan-19-2012 (Opening).

PMI

 
 Reply 
 
eron
Worldwide, Joined Nov 2011, 5

eron

Worldwide,
Joined Nov 2011
5
01:17 Jan-20-2012
Re: material testing
In Reply to eron at 00:29 Jan-19-2012 (Opening).

I am more looking for the astm or aisi document

 
 Reply 
 
S V Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S V Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
14:52 Jan-20-2012
Re: material testing
In Reply to eron at 01:17 Jan-20-2012 .

There are many standards for elemental analysis. Most of them depend on spectrography, XRF etc. for the main alloying elements and special equipment for Carbon and Sulphur (combustion based methods). Vacuum Emission Spectrometers provide almost a one-stop solution for most of the commercial austenitic stainless steels.

Confirmation of PMI (which is done mostly by Shop floor portable spectroscopy and or XRF) is done using the laboratory VES as mentioned above or wet chemical methods in case of border results.

Regards

Swamy

 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window