where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
43456 views
Technical Discussions
Al Rashid Wahab
Al Rashid Wahab
02:06 Oct-14-1998
UT on polymers

I would like to know if UT is possible on polymers, spesifically test on PP or EPR. If it is, what are the features on such testing. What information could I get from the test?

Thank you in advance.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:20 Oct-14-1998
Re: UT on polymers

: I would like to know if UT is possible on polymers, spesifically test on PP or EPR. If it is, what are the features on such testing. What information could I get from the test?

: Thank you in advance.

Most of the activity in the field of ultrasonic testing of polymers involves thickness gaging of molded and extruded products. In the case of extruded tubes and pipes, thickness gaging is often performed in an in-process or on-line mode. In the case of more complex molded parts, it is usually done as an off-line quality control check. It is generally possible to locate unwanted bubbles or voids in polymers, and again this is sometimes done in-process, such as in critical applications like high voltage cable jackets. Finally (and much less commonly implemented), it is possible to analyze material properties of polymers by measuring changes in sound velocity and/or attenuation.

You can find further details on theory and practice in the NDT Applications section of my company's web site at

--Tom Nelligan
Senior Applications Engineer
Panametrics, Inc.


 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
08:42 Oct-14-1998
Re: UT on polymers



 
 Reply 
 
Jeff Phillips
Jeff Phillips
03:37 Oct-15-1998
Re: UT on polymers



 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1285

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1285
03:21 Oct-15-1998
Re: UT on polymers
NDE in general is applied to Polymers of many varieties.
High and low temperture applications, cure rates, degree of cross-linking, etc.
A couple of references might help illustrate the extent of this aplication.

Also, contact Dr. N.D.Patel at fallon@netcom.ca

The books:
Title:
Polymer NDE : proceedings of the European Workshop on Nondestructive Evaluation of
Polymers and Polymer Matrix Composites, Hotel Golf Mar, Termar do Vimeiro, Portugal,
September 4-5, 1984 / edited by K.H.G. Ashbee. -
Conference Name:
European Workshop on Nondestructive Evaluation of Polymers and Polymer Matrix
Composites (1984 :
Publisher:
Lancaster, Pa. : Technomic, c1986.
Type of Material:
Book
Format:
Print Material
Call Number:
TA417.2.E96 1984
Subject(s):
Non-destructive testing--Congresses.
Polymers and polymerization--Testing --Congresses.
Polymeric composites--Testing --Congresses.
Description:
xiv, 332 p. : ill. ; 24 cm.
ISBN/ISSN:
0877624461
Notes:
Includes bibliographies and index.


Title:
Physical chemistry. -
Relaxation and viscoelastic properties of heterogeneous polymeric compositions.
Electro-optic methods for characterizing macromolecules in dilute solution.
Ultrasonic degradation of polymers in solution.
Series:
Advances in polymer science ; 22.
Authors:
Lipatov, IU. S. (IUrii Sergeevich), 1927-. Relaxation and viscoelastic properties of heterogeneous
polymeric compositions. 1977.
Jennings, Barry Randall, 1939-. Electro-optic methods for characterizing macromolecules in dilute
solution. 1977.
Basedow, Arno M. Ultrasonic degradation of polymers in solution. 1977.
Publisher:
Berlin : Springer-Verlag, 1977.
Call Number:
QD281.P6F6 v. 22

Hope this helps;
Ed




 
 Reply 
 
Stojan Rendevski
Stojan Rendevski
01:54 Jun-25-1999
Re: UT on polymers



 
 Reply 
 
Dongbiao Wang
Dongbiao Wang
02:22 Jul-11-2001
Re: UT on polymers
Hi:
Can recommend some articles and experiment setup for
on-line polymer extrusion? It is used for characterization of polymer dispersity, density, viscosity, and etc.
Thank you in advance.
wang dongbiao


 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
08:04 Jul-11-2001
Re: UT on polymers
: Hi:
: Can recommend some articles and experiment setup for
: on-line polymer extrusion? It is used for characterization of polymer dispersity, density, viscosity, and etc.
: Thank you in advance.
: wang dongbiao
.There are some Universities like Mississippi State University and McMaster University has used ultrasonics for characterisation of polymers using Fallon Ultrasonic System and they had success. I do not have articles but try to refer some papers By Dr. Balakrishnan or Dr. Johari. You need very accurate time measurements and you have to use both shear wave for viscosity and Longitudingal for rest of the requirements. Both change in croslink density, compositional variation etc information has be obtianed.
If you need more information contact me

Regards

Dr. Patel



 
 Reply 
 

Product Spotlight

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window