where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
513 views
Technical Discussions
Christoph Schnitger
Christoph Schnitger
01:28 Oct-23-2001
Spott Video Inspection ( called SVI )

Dear Members of the NDT Community...

i am looking for a system called Spott - Video - Inspection
which is really new on the german NDT Market.

This system is probably more useful to test and detect faults
in Glas fibre reinforced plastic (GFK)
Carbon fibre reinforced plastic (CFK)
Composite materials
Sandwich and honeycomb constructions
Titanium and aluminium coatings


The really short description about the technigue :

Active test method
Exposure of the parts (hull) with certain wave lengths (light)
Registration of all relevant datas
Software processing these datas into image files

Every Information about this NDT Method will be helpful.
Many Thanks in advance !

C.Schnitger ( schnitger@eure.de )





 
 Reply 
 
Michel Honlet
Michel Honlet
02:48 Apr-25-2002
Re: Spott Video Inspection ( called SVI )
Dear Mr Schnitger,

we are consultants for the industry regarding NDT exclusively with optical techniques (see www.honlet.com ; page still in a build-up process...)

My question to you:
Have you progressed in getting more information about SVI and what level of information or experience have you now? What did tell you (except the manufacturer, of course) this is a really new technique?
From what I have seen up to now I am not yet convinced that it is really new. Despite being an optimistic and positive person in this case I still feel an attempt to "sell" something existing as something "new", based on such experience in the past regarding optical methods. But I am ready to learn more and to join your opinion if that is still valid. Ultimately, the industrie finds out sooner or later what is going on but appreciates independent support in the selection process in order to avoid waste of time. So do we.

Many thanks in advance for your reply!

Michel Honlet - Managing Director


: Dear Members of the NDT Community...
.
: i am looking for a system called Spott - Video - Inspection
: which is really new on the german NDT Market.
.
: This system is probably more useful to test and detect faults
: in Glas fibre reinforced plastic (GFK)
: Carbon fibre reinforced plastic (CFK)
: Composite materials
: Sandwich and honeycomb constructions
: Titanium and aluminium coatings
.
:
: The really short description about the technigue :
.
: Active test method
: Exposure of the parts (hull) with certain wave lengths (light)
: Registration of all relevant datas
: Software processing these datas into image files
.
: Every Information about this NDT Method will be helpful.
: Many Thanks in advance !
.
: C.Schnitger ( schnitger@eure.de )
.
.



 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window