where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

532 views
Technical Discussions
Dave
Dave
02:18 Apr-30-2002
Unions open to UK NDT Technicians.


Does anyone know of any trade unions who's membership is open to UK resident NDT Technicians?

As yet I have not contacted any of the various unions directly but was wondering if anyone could narrow the field a little before I started.

Any help would be appreciated.




 
 Reply 
 
Dave Wilkes
Dave Wilkes
05:50 Apr-30-2002
Re: Unions open to UK NDT Technicians.
Dave

There is no specific union for UK ndt techs and very few bother to join one. but I am sure any UK union
would welcome you as a member.

Usually they join the union that is strongest in their
workplace. For example I used to work in a large
boiler manufacturing factory, so I joined the boilermakers http://www.gmb.org.uk

If you are working in aerospace or aviation you might
want to look at a union that has a large number of members working in that industry.

Ask around in your workplace(s) to find out what
union everyone else is in.

Hope this helps

Regards

Dave Wilkes
Asst Editor
http://www.ndtcabin.com "The internet magazine for
ndt professionals"



 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window