where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
640 views
Technical Discussions
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
00:03 Mar-26-2002
Multimedia Training CDROM on NDT

SIMULA, Italian Company leader on Multimedia Training, announce the realization of 4 multimedia training CDROM on NDT, methods MT, PT RT, UT.
The multimedia training CDROMS on NDT from SIMULA are a useful vehicle for basic training, for both future field operators and teachers who can project them in the classroom during lessons.
Some of the leading Italian companies (in the automobile, oil and rail industries) and NDT training centres use them for their in-house training and as support material for their teachers.
Demo are available at the address:
http://www.simula.it/Simula-En/Prodotti.htm


 
 Reply 
 
satish sharma
satish sharma
06:59 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Kindly send in the information about ur product
We wil be interested in it.
Thanks
satish


 
 Reply 
 
Fiorenzo Sorcinelli
Fiorenzo Sorcinelli
02:48 Apr-25-2002
Re: Multimedia Training CDROM on NDT
Our international distributor (www.sonatest-plc.com) will send you the requested information about our NDT cdrom.
Meantime, you can read information on our web site at this address: http://www.simula.it/Simula-En/Prodotti.htm
Best regards.
Fiorenzo Sorcinelli

.



 
 Reply 
 
Satish Sharma
Satish Sharma
08:47 May-09-2002
signal analysis using spectrum analyser
: Kindly send in the information about signal analysis using spectrum analyser. I would like the signal to be displayed on the monitor in real time measurements using an ADC card.
Thanks
satish



 
 Reply 
 
D. Robert Hay
Engineering,
TISEC Inc., Canada, Joined Apr 2002, 3

D. Robert Hay

Engineering,
TISEC Inc.,
Canada,
Joined Apr 2002
3
09:25 May-09-2002
Re: signal analysis using spectrum analyser
You may be interested in a couple of our products for NDT signal analysis, ICEPak for analyses that are much more powerful than simple spectral analysis and the MM Pattern Recognition Manual. Check out ICEPak at www.supericepak.com and the PR Manual at http://www.tisec.com/products/matlibe/pattern_recognition.htm


 
 Reply 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window