where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes (CMS) is a leader in Non Destructive Testing (NDT) with a complete range of products for eddy current and ultrasonic i ...
2890 views
Technical Discussions
GOWRISANTHOSH
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

GOWRISANTHOSH

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
14:23 Mar-23-2012
Circumferential scanning by UT

Q. Circumferential angle beam scanning is carried out form OD surface using 60 Degree shear wave angle beam probe on a tubular forging whose OD is 400mm and ID is 320 mm. The effective coverage in this scan is ?

I have used the formula for above question is
X=OD/2(1-SIN60)

but couldnt get the answer

am I correct?

help me..

 
 Reply 
 
Ed T
Ed T
02:28 Mar-24-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

The following formulas can be used to determine the refracted angle and impinging angles for circumferential scans.

a.) To determine the refracted angle of the shear wave from the probe, use the following formula:
sin › 1 = (sin › 2 * Velocity Shear)/Velocity Longitudinal

b.) To determine the impinging angle at the ID surface, use the following formula:
sin › 2 = sin › 1 * (Inner Diameter)/Outer Diameter

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 877

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
877
03:33 Mar-26-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

GOWRISANTHOSH

ID radius / OD radius = Sin-1 (maximum angle use for inspection)
160mm / 200mm = 0.8 = 53.1°

90° - 53.1° = 36.9° (angle spread between surface and maximum angle used for inspection)

1° = WT / Sin-1 (ID radius / OD radius)
40mm (WT) / 36.9° = 1.084mm per degree

90° - 60° (your probe angle) = 30°
30° * 1.084mm = 32.52mm

 
 Reply 
 
ROSHAN SIGNH
NDT Inspector,
India, Joined May 2011, 1

ROSHAN SIGNH

NDT Inspector,
India,
Joined May 2011
1
14:40 Mar-20-2014
Re: Circumferential scanning by UT
In Reply to Michel Couture at 03:33 Mar-26-2012 .

Q.specify calculation of acoustic velocity?
reply please....

 
 Reply 
 
Radoslaw
NDT Inspector, Materials Engineer
Poland, Joined Apr 2012, 51

Radoslaw

NDT Inspector, Materials Engineer
Poland,
Joined Apr 2012
51
09:08 Mar-22-2014
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

Hi,
In EPOCH 600 from Olympus is "CSC" function, if you enter Outer Diameter for example 400mm and thickness 80 mm he will calculate right angle and sound path (trigonometry).

 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window