where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2891 views
Technical Discussions
GOWRISANTHOSH
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

GOWRISANTHOSH

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
14:23 Mar-23-2012
Circumferential scanning by UT

Q. Circumferential angle beam scanning is carried out form OD surface using 60 Degree shear wave angle beam probe on a tubular forging whose OD is 400mm and ID is 320 mm. The effective coverage in this scan is ?

I have used the formula for above question is
X=OD/2(1-SIN60)

but couldnt get the answer

am I correct?

help me..

 
 Reply 
 
Ed T
Ed T
02:28 Mar-24-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

The following formulas can be used to determine the refracted angle and impinging angles for circumferential scans.

a.) To determine the refracted angle of the shear wave from the probe, use the following formula:
sin › 1 = (sin › 2 * Velocity Shear)/Velocity Longitudinal

b.) To determine the impinging angle at the ID surface, use the following formula:
sin › 2 = sin › 1 * (Inner Diameter)/Outer Diameter

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 877

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
877
03:33 Mar-26-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

GOWRISANTHOSH

ID radius / OD radius = Sin-1 (maximum angle use for inspection)
160mm / 200mm = 0.8 = 53.1°

90° - 53.1° = 36.9° (angle spread between surface and maximum angle used for inspection)

1° = WT / Sin-1 (ID radius / OD radius)
40mm (WT) / 36.9° = 1.084mm per degree

90° - 60° (your probe angle) = 30°
30° * 1.084mm = 32.52mm

 
 Reply 
 
ROSHAN SIGNH
NDT Inspector,
India, Joined May 2011, 1

ROSHAN SIGNH

NDT Inspector,
India,
Joined May 2011
1
14:40 Mar-20-2014
Re: Circumferential scanning by UT
In Reply to Michel Couture at 03:33 Mar-26-2012 .

Q.specify calculation of acoustic velocity?
reply please....

 
 Reply 
 
Radoslaw
NDT Inspector, Materials Engineer
Poland, Joined Apr 2012, 51

Radoslaw

NDT Inspector, Materials Engineer
Poland,
Joined Apr 2012
51
09:08 Mar-22-2014
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

Hi,
In EPOCH 600 from Olympus is "CSC" function, if you enter Outer Diameter for example 400mm and thickness 80 mm he will calculate right angle and sound path (trigonometry).

 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window