where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1456 views
Technical Discussions
Alexopoulos Nikolaos
Alexopoulos Nikolaos
07:32 Jan-26-2001
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

: <: ECW
: Mr. Boyer
: Le Chene Rond
: F-91570 Biévres
: phone: 1-69 41 80 20
: email: ecw@wanadoo.fr




 
 Reply 
 
MARIE, Redwane
MARIE, Redwane
03:09 Jan-10-2000
acoustic methods to control fatigue in aluminium

I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
Thank you for your answer.


 
 Reply 
 
Jens Forker
Jens Forker
04:03 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.

<ECW
Mr. Boyer
Le Chene Rond
F-91570 Biévres
phone: 1-69 41 80 20
email: ecw@wanadoo.fr


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
06:06 Jan-10-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.


Hallo,
My company specialises in using Ultrasonic and Acoustic Resonance methods to inspect components and structures.
The resonances of a component depend upon the material properties, and these are changed with fatigue.
Please see our web site also for more details. This is
www.hands-ndt.co.uk.

Godfrey Hands



 
 Reply 
 
Athanassios Anastassopoulos
Athanassios Anastassopoulos
02:29 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: Thank you for your answer.




 
 Reply 
 
Athanassios Anastassopoulos
Director,
Mistras Group, Greece, Joined Jan 2000, 14

Athanassios Anastassopoulos

Director,
Mistras Group,
Greece,
Joined Jan 2000
14
02:37 Jan-13-2000
Re: acoustic methods to control fatigue in aluminium
: : I am searching information about acoustic methods to control the effects of fatigue over aluminium at law price.
: : Thank you for your answer.

Low price some times means reduced performance or capabilities. In order to propose a system or method it is essential to know your needs (fatigue experimental set-up, fatigue frequency,specific interest on onset of crack initiation, location or not, Dt front end filtering requirements etc.). A variety of systems are available from PAC (Web Page www.pacndt.com), ranging from simple low cost university packages to large industrial systems.
Please let us know more about your application and needs.




 
 Reply 
 
guilherme veloso
guilherme veloso
01:26 May-11-2002
Re: acoustic methods to control fatigue in aluminium
please send reprint this article

thank you


 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window