where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2889 views
Technical Discussions
GOWRISANTHOSH
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

GOWRISANTHOSH

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
14:23 Mar-23-2012
Circumferential scanning by UT

Q. Circumferential angle beam scanning is carried out form OD surface using 60 Degree shear wave angle beam probe on a tubular forging whose OD is 400mm and ID is 320 mm. The effective coverage in this scan is ?

I have used the formula for above question is
X=OD/2(1-SIN60)

but couldnt get the answer

am I correct?

help me..

 
 Reply 
 
Ed T
Ed T
02:28 Mar-24-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

The following formulas can be used to determine the refracted angle and impinging angles for circumferential scans.

a.) To determine the refracted angle of the shear wave from the probe, use the following formula:
sin › 1 = (sin › 2 * Velocity Shear)/Velocity Longitudinal

b.) To determine the impinging angle at the ID surface, use the following formula:
sin › 2 = sin › 1 * (Inner Diameter)/Outer Diameter

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 877

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
877
03:33 Mar-26-2012
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

GOWRISANTHOSH

ID radius / OD radius = Sin-1 (maximum angle use for inspection)
160mm / 200mm = 0.8 = 53.1°

90° - 53.1° = 36.9° (angle spread between surface and maximum angle used for inspection)

1° = WT / Sin-1 (ID radius / OD radius)
40mm (WT) / 36.9° = 1.084mm per degree

90° - 60° (your probe angle) = 30°
30° * 1.084mm = 32.52mm

 
 Reply 
 
ROSHAN SIGNH
NDT Inspector,
India, Joined May 2011, 1

ROSHAN SIGNH

NDT Inspector,
India,
Joined May 2011
1
14:40 Mar-20-2014
Re: Circumferential scanning by UT
In Reply to Michel Couture at 03:33 Mar-26-2012 .

Q.specify calculation of acoustic velocity?
reply please....

 
 Reply 
 
Radoslaw
NDT Inspector, Materials Engineer
Poland, Joined Apr 2012, 51

Radoslaw

NDT Inspector, Materials Engineer
Poland,
Joined Apr 2012
51
09:08 Mar-22-2014
Re: Circumferential scanning by UT
In Reply to GOWRISANTHOSH at 14:23 Mar-23-2012 (Opening).

Hi,
In EPOCH 600 from Olympus is "CSC" function, if you enter Outer Diameter for example 400mm and thickness 80 mm he will calculate right angle and sound path (trigonometry).

 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window