where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
613 views
Technical Discussions
Massimiliano Pau
Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering, Italy, Joined Sep 2002, 25

Massimiliano Pau

Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering,
Italy,
Joined Sep 2002
25
00:41 May-29-2002
Test blocks for training

Hello all

I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.

Is there any vendor located in Europe?

Massimiliano


 
 Reply 
 
Joe Buckley, Sonatest Plc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest Plc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
01:36 May-29-2002
Re: Test blocks for training
If you are looking for 'standard' calibration blocks then there are many vendors (ourselves included). If you are looking for 'realistic' defective training samples than I would recommend Sonaspection (www.sonaspection.com)

Rgds
Joe Buckley

: Hello all
.
: I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.
.
: Is there any vendor located in Europe?
.
: Massimiliano
.



 
 Reply 
 
Iikka Virkkunen, Trueflaw Ltd.
Iikka Virkkunen, Trueflaw Ltd.
04:16 May-29-2002
Re: Test blocks for training

: I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.
.
: Is there any vendor located in Europe?

Trueflaw Ltd. does in-situ production of realistic surface cracks with thermal fatigue.

You can find us at http://www.trueflaw.com

Also, if you have any questions or requests for additional information, please do not hesitate to contact me (iikka.virkkunen@trueflaw.com).

Best regards,

Iikka Virkkunen
Trueflaw Ltd.



 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window