where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
578 views
Technical Discussions
Massimiliano Pau
Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering, Italy, Joined Sep 2002, 25

Massimiliano Pau

Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering,
Italy,
Joined Sep 2002
25
00:41 May-29-2002
Test blocks for training

Hello all

I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.

Is there any vendor located in Europe?

Massimiliano


 
 Reply 
 
Joe Buckley, Sonatest Plc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley, Sonatest Plc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
01:36 May-29-2002
Re: Test blocks for training
If you are looking for 'standard' calibration blocks then there are many vendors (ourselves included). If you are looking for 'realistic' defective training samples than I would recommend Sonaspection (www.sonaspection.com)

Rgds
Joe Buckley

: Hello all
.
: I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.
.
: Is there any vendor located in Europe?
.
: Massimiliano
.



 
 Reply 
 
Iikka Virkkunen, Trueflaw Ltd.
Iikka Virkkunen, Trueflaw Ltd.
04:16 May-29-2002
Re: Test blocks for training

: I would like to purchase some test blocks with internal or surface cracks to make some demonstration to my students for UT, penetrant and MPI inspections.
.
: Is there any vendor located in Europe?

Trueflaw Ltd. does in-situ production of realistic surface cracks with thermal fatigue.

You can find us at http://www.trueflaw.com

Also, if you have any questions or requests for additional information, please do not hesitate to contact me (iikka.virkkunen@trueflaw.com).

Best regards,

Iikka Virkkunen
Trueflaw Ltd.



 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window