where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
788 views
Technical Discussions
Alexander Kren
Alexander Kren
08:39 May-29-2002
I am looking for people who deal with the testing of polymeric paterials

I am looking for people who deal with the testing of polymeric materials.
I am interesting in investigation polymers and NDT tests of them.
Especially rubbers and composites.
thanks for any help.
aleks.p.k@iaph.bas-net.by





 
 Reply 
 
Richard Kazares
Richard Kazares
09:13 May-29-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Depending on the specifics of your materials and material geometries, our company has recently introduced a low-frequency based UT technology that can be used to inspect multi-layered, internally bonded, thick-section composites and rubber (also rubber-like) materials from a SINGLE SIDE. The system (which we have named TSCOUT - for Thick Section Composite Oblique Ultrasonic Testing) uses either a single set - or an array (up to 4) sensor pairs at specific angles and frequencies designed to optimize UT penetration (and reflection) form normally VERY DIFFICULT to inspect materials - and which (previously) have almost always required dual-sided (through penetration) inspection techniques.

Please contact me directly for more details - if this of interest - since I don't want to sound too much like advertising.

: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.



 
 Reply 
 
Benmedakhene
Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne, France, Joined Jan 2002, 1

Benmedakhene

Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne,
France,
Joined Jan 2002
1
02:28 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Our knowledge is in acoustic emission testing of composite materials.
This type of NDT allows a real follow-up of the damage and failure of the composites structures.
If our activity interests you, do not hesitate to contact us.
Universite de Technologie de Compiègne, in France
Cordially


 
 Reply 
 
Jim Knowles
Jim Knowles
03:04 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.I undertook some ultrasonic inspection work with POLYTEST in Moscow who I believe may be of help.
E-mail:polytest@mtu-net.ru
They have developed inspection methods using ultrasound on PVC and Polythene type plastics.



 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window